How do I set the timer on my Moultrie feeder?

How do I set the timer on my Moultrie feeder?

SET TIME OF DAY: Press the UP or DOWN button until the correct time of day appears. Press and release button to single-step through the minutes or hold down to advance quickly. SET FEED TIMES: Press the SET button until the correct Timer Number appears in the upper right hand corner as shown.

How do you test a timer on a Moultrie feeder?

TEST FEEDER: PRESS AND HOLD the SET button while the RUN-TIME SECONDS are displayed. Release the button and get away from the feeder when the message “TESTING GET AWAY” appears on the display.

Why is my Moultrie feeder not working?

Attempt a reset by pressing and holding the reset button on the backside of your timer, where the wires come out, for 30 seconds. If using a solar panel, ensure that the battery is connected to the feeder before you plug in or clip on the solar unit.

How does an automatic deer feeder work?

Automatic deer feeders feature digital timers and motors to spread the feed evenly around them. Since solar panels became more reliable and cheaper to produce, game feeder manufacturers started using them in their products, meaning that hunters don’t have to re-visit their feeders periodically to replace batteries.

What is Moultrie feeder activator connection?

The Feeder Activator allows a feeder motor to be remotely activated from up to 300 feet away. The Feeder Activator consists of a Receiver that mounts in your wildlife feeder and a Handheld Transmitter.

Why do deer stop coming to feeder?

When large mast crops such as acorns, wild berries, fruit or mesquite beans become available deer will also back off on feed. Hunting pressure or the presence of a native predator such as bobcat, mountain lions or bears can also cause deer to decrease feeder visitation frequency.

How do I use my Moultrie game camera?

  1. 10172013 • MCG-12589 / MCG-12646.
  2. Open camera cover. Install 4 C-cell alkaline batteries.
  3. Insert SD Memory Card until you hear an audible click. Camera will not operate without SD card.
  4. Mount camera in desired location using a mounting strap. Switch camera to IR AIM.
  5. Set the Delay and Resolution.
  6. 2 GB.
  7. 16 GB.
  8. 2 GB.

How to set an Intermatic wall timer?

How to Set an Intermatic Wall Timer. Erase all previous timer settings by sliding the control lever left to the “Off” position. Move the control lever to the “On” position. Turn the time dial clockwise until you reach the half hour that is closest to your present time. Press the time dial to set the present time. Click to see full answer.

How to set an Intermatic timer?

Open the door of the room where you will set the timer..Now use your hand. With the help of this,open the door in the gray box.

  • The large arrow on the clock indicates the current. The yellow clock should rotate the hand using the hand.
  • Now it’s time to loosen the arrows.
  • Need to set on or off arrows.

    • How to program a Moultrie deer feeder?

    Tapered design with 30-gallon capacity holds up to 200lbs.

  • Programmable digital timer; schedule up to 6 feedings a day.
  • Customize feed dispense time between 1–20 seconds.
  • Operates on one 6-volt battery (not included).

    • How to set multiple timers?

    Press the “Week” button to cycle through each day or combination of days of the week.

  • Use the “Hour” and “Min” button to select the specific timing for the event,taking care to note AM and PM hours.
  • If your model has arrow buttons,use them to cycle through the various options and select them with the “Set” button.
    • Q&A