What does T stand for in wood?
Taper. A piece of wood that has been cut so that it is wider on one edge compared to the other. Taper Cut. The new wood in a tree that lies between the bark and the heartwood. Sapwood is usually lighter in color and becomes heartwood as the tree ages.
Where does purpleheart wood come from?
Peltogyne, commonly known as purpleheart, violet wood, amaranth and other local names (often referencing the colour of the wood) is a genus of 23 species of flowering plants in the family Fabaceae; native to tropical rainforests of Central and South America; from Guerrero, Mexico, through Central America, and as far as …
How much is a board foot of purple Heart?
$14.99 /Board Feet
| 1-99 | $14.99 /Bd. Ft. |
|---|---|
| 100+ | $11.24 /Bd. Ft. (25% off) |
Can purple heart wood be used for cutting boards?
Looking for a unique cutting board to class up your kitchen cooking? Then look no further. This board is made from the elegant purpleheart wood along with white hard maple. Finished with several coats of mineral oil and rewaxed with a beeswax/mineral oil mixture at time of shipment.
What does BTR mean on lumber?
Better
Grades:
| BTR | Better |
|---|---|
| B&B | B & Better |
| CON COM | Construction Common Redwood |
| CON HEART | Construction Heart Redwood |
| STD BTR | Standard & Better |
What does SPF mean in lumber?
spruce-pine-fir
SPF stands for spruce-pine-fir. The three types of wood are processed together and can be used in similar situations because they have very similar properties.
Is purpleheart a hardwood?
More Info: Purpleheart is one of the most durable and stable species of hardwood available. Although striking in color, Purpleheart can be stained to appear more red-brown and less purple-pink. Fantastic for interior flooring, exterior decking and industrial uses.
Is purpleheart wood toxic?
As a finished project in your kitchen, purple heart wood is an excellent choice for a cutting board. The wood is food safe and safe in general, and once assembled and finished, will cause no allergies or adverse reactions.
What is D & Btr lumber grade?
This is the Pine grade that includes all of the select grades. This grade may allow sound tight knots (STK), but for the most part this lumber is clear and free of defects.
What type of wood is purpleheart?
Purpleheart wood, often referred to as amaranth, violet wood, amendoim, peltogyne, and other names, grows throughout Central and South America, primarily in the Amazon Basin….Characteristics of Purpleheart Wood.
| Color | Brownish-Purple to Eggplant |
|---|---|
| Source | Purpleheart Tree (Peltogyne) |
| Hardness | 1860 on the Janka scale |
Does purpleheart wood stay purple?
After just a few short days of exposure to air and light, the color change is abrupt. A Purple Heart project exposed to air and light will darken to a dark brown over time if kept indoors. An exterior Purple Heart project will age to a silver color, just like most other woods exposed to the outdoor elements.
What is the thickness of 8/4 drywall?
For 8/4 and thicker, theallowance is 1/8 inch (with very few allowed 3/16 inch), sothe minimum thickness in the grading area is 1-7/8 inch. In most cases for 4/4and 5/4, and for 8/4, this allowance is adequate to account of rate shrinkagethat occurs in the drying operation.
What is the thickness of green sawn lumber?
Green or Air-Dried For green, freshly sawn lumber, to be called 4/4, the thicknessin the grading area must be over 1.00 inch; for 5/4, 1.25 inch; for 8/4, 2.00inch. However, lumber does shrink in thickness (and width) when it goes fromgreen to air-dried. The shrinkage varies with species.
How thick is planed kiln dried lumber?
Kiln-Dried Planed. Finally, sometimes kiln-dried lumber is planed or surfaced on twosides (S2S) prior to grading. In the case of planed lumber, an extra allowanceis given. For 4/4, the surfaced thickness can be as thin as 13/16 inch; for5/4, 1-1/16 inch; for 8/4, 1-3/4 inch. A special note about planning.
What is the thinnest grade for a 4/4 board?
This rule, applied when roughkiln-dried lumber is graded, allows the thinnest spot in the grading area to be1/16 inch thinner (and a very few pieces can be 3/32 inchthinner) for 4/4, 5/4, 6/4 and 7/4 lumber; that is 15/16 inchfor 4/4, 1-3/16 inch for 5/4, etc.