What does E and F mean on gas meter?
It’s your usage. You are controlling your energy. Current mode P is Pay As You Go mode E is Emergency Credit mode F is Friendly Credit mode C is Credit mode days left.
How do I read my npower gas meter?
For gas smart meters, press and hold the red button A for 5-10 seconds. This will then display ‘Credit ON’. Press and release button A, and the meter will display the reading.
How do I get a meter reading from a prepayment gas meter?
Prepayment gas meter readings To view your meter reading, simply push the button located on the front of your gas meter. Doing this will change display to show your reading. From this point just note down the reading as normal.
How do I read my gas meter on my Edmi GS 60B?
If your meter is an EDMI GS-60B the screen will be blank. To display the reading press the right hand of the two grey buttons. It may be necessary to hold the button down for a few seconds. The display is maintained for 3 seconds.
How do you read how much gas you have?
If the gas tank on a car holds 20 gallons of gas, and the gauge read “1/2”, you have 10 gallons of gas. If your car gets 30 miles to the gallon, this means you can drive about 300 miles on a half tank of gas.
What does F mean on meter?
What is the B button on gas meter?
Once you get to this option, you should be able to see your electricity reading. To take an export reading from your Aclara SMETS2 electricity meter: Press the B button to wake the screen up. After the screen lights up, press the B button several times until you see a message that starts with either ‘Total’ or ‘TOU’.
How do I read my Edmi gas smart meter?
How to read your EDMI SMETS2 Meters: To read your electricity meter, press the button on the right to wake up the meter screen. You should see the words ‘Active Import Register’, and a number which is your meter reading. The display will automatically cycle through other screens, but this first one is your reading.
How do you know if you have enough gas?
The fuel gauge is on empty: The easiest and quickest way to assess your gas level is to check the fuel gauge on the dashboard. If the fuel indicator shows your car is low on gas (below a quarter-tank), it is best to fill up ASAP.
What is gas meter reading?
Gas meters explained. All gas meters display a single four or five digit number indicating the number of gas units you’ve used. You can work out how many units you’ve used by subtracting your previous reading from an up-to-date one.
What are the A and B buttons on my electric meter?
If you pay a single rate To read the meter: press the white B button – the screen will light up. wait until the screen says ‘meter boost’ – press ‘A’ to select ‘no’ and you should see numbers followed by ‘KWH’ write down the numbers from left to right.
How many digits is A gas meter reading?
Every gas point in the country has a unique identification number known as a Gas Point Registration Number (GPRN) which is 7 digits long.