Skip to content
Tonyajoy.com
Tonyajoy.com

Transforming lives together

  • Home
  • Helpful Tips
  • Popular articles
  • Blog
  • Advice
  • Q&A
  • Contact Us
Tonyajoy.com

Transforming lives together

27/07/2022

What is a Hi-Lift Jack used for?

Table of Contents

Toggle
  • What is a Hi-Lift Jack used for?
  • Are all hi-lift jacks the same?
  • What size high jack do I need?
  • Can a 1.5 ton jack lift a SUV?
  • Do I need a 2 ton or 3-Ton jack?
  • How to install a hi lift jack?
  • What is a hi lift?

What is a Hi-Lift Jack used for?

The most common use for a Hi-Lift is lifting a vehicle to change a tire or to lift a stuck wheel or a truck’s belly off the ground. You also can use one to hand winch a stuck vehicle loose or as a clamp or a spreader, during field repairs to squeeze parts together or pull them apart.

How much does a Hi-Lift Jack weigh?

Specifications

HL-364 HL-604
TL on upper 12″ (30.5cm) – 4,000 lbs (1,814 kg)
Winching Capacity 5,000 lbs (2,268 kg) 5,000 lbs (2,268 kg)
Clamping Capacity 750 lbs (340 kg) 750 lbs (340 kg)
Weight 25 lbs (11.35 kg) 30.12 lbs (13.66 kg)

Are all hi-lift jacks the same?

Hi-Lift Jack company produces two types of mechanical jacks, often referred to as Handyman Jacks, farm jacks, or trail jacks. Even though we produce nineteen different jack models of various sizes and colors, they are all built off of two different foundations; the All-Cast Jack and the Cast and Steel Jack.

How much weight can a high lift jack hold?

Although light in weight and easy to manuever, the Hi-Lift Jack offers a rated load capacity of 4, 660 pounds (2114kg) and a tested load capacity of 7, 000 pounds (3175kg), achieving a 150% safety factor.

What size high jack do I need?

The most common size for most off-roaders is the 48″. As a general guide, the 48″ is the most popular choice since it fits most 4WD’s. If your truck has a 5-6″ lift and tires bigger than 33″ then opt for the 60″.

Are all hi lift jacks the same?

Can a 1.5 ton jack lift a SUV?

A 1.5-ton jack should be enough for an SUV that’s 4000 pounds or less. If your SUV’s over 4,000 pounds, you’ll need 2-ton jacks or higher, depending on the vehicle’s weight.

Should I buy a 2 ton or 3-Ton jack?

The Best Floor Jack: Tonnage Capacity Most Pro users can get away with 2.5-ton machines, but repair shops usually opt for at least 3 tons to cover all the bases. The tradeoff with a higher capacity jack is slower action and heavier weight.

Do I need a 2 ton or 3-Ton jack?

Do I need a 2 or 3-ton jack? 2-ton jacks will work on any 5,250-pound vehicle or less. But if it exceeds the 5,250-pound limit, it’ll require a 3-ton jack or higher to work on your particular vehicle safely.

Is 1.5 ton floor jack enough?

1.5T is definitely good enough for one corner at a time. I use 2 x 1.5T floor jacks and car stands only when I need to leave car up for extended period. Jack the car up under the diff and put jack stands under the lift pads on the sides.

How to install a hi lift jack?

Wrenches – 3/8″ and 5/16″

  • Power Drill
  • Drill Bits – 1/8″ and 5/16″
  • Center Punch
  • Do I need a high lift jack?

    Lift height has nothing to do with how tall the jack must be in order to change tires since you lift the tire off the ground by jacking from underneath the axle. Rarely will you ever even need a Hi-Lift. In the past 8 years, I have used my Hi-Lift exactly twice and neither time did I really need to.

    What is a hi lift?

    Follow the instructions that come with the hair color—they should involve mixing the color and two parts 40-volume developer in a bowl.

  • Section your hair into four quarters,dividing it down your part and then horizontally across the back of your head.
  • Working with one section at a time,paint the dye on your hair layer by layer,section by section.
  • How to use a high lift jack?

    Method 1 Method 1 of 4: Jack. Chock the opposite wheel if you’re raising a vehicle.

  • Method 2 Method 2 of 4: Winch. Place the jack on its side with the top clamp in line with the bar.
  • Method 3 Method 3 of 4: Clamp or Spreader. Loosen the bolt on the top clamp of the jack.
  • Method 4 Method 4 of 4: Maintenance and Storage.
  • Helpful Tips

    Post navigation

    Previous post
    Next post

    Recent Posts

    • Is Fitness First a lock in contract?
    • What are the specifications of a car?
    • Can you recover deleted text?
    • What is melt granulation technique?
    • What city is Stonewood mall?

    Categories

    • Advice
    • Blog
    • Helpful Tips
    ©2025 Tonyajoy.com | WordPress Theme by SuperbThemes