Is Delrin glass filled?
DELRIN® 570 shapes are 20% glass filled materials intended for general industrial use. The material offers very high stiffness, low warpage, and low creep for superior part performance under stress.
What is glass filled nylon used for?
Glass filled nylon is widely used for 3D printing, additive manufacturing and other applications that need to incorporate strength and stiffness, as well as ability to bear loads. Order glass filled nylon and other types of nylon from Polymershapes.
How strong is glass-filled nylon?
Tensile Strength, Yield: 10,200 psi.
Is glass-filled nylon as strong as steel?
Its tensile strength is as much as 70 percent greater than standard nylon.
Is glass-filled nylon brittle?
For glass-filled nylon, these challenges include: It is more brittle than standard nylon. It can cost approximately 50-100% more than unfilled counterparts. It is abrasive and will cause accelerated wear on tools.
Is glass-filled nylon the same as fiberglass?
Compared to sheet materials Bulk glass filled materials are considered distinct from fibreglass or fibre-reinforced plastic materials. These use a substrate of fabric sheets made from long fibres, draped to shape in a mould and then impregnated with resin.
How do you cut glass-filled nylon?
Cutting tools need to stay razor sharp in order to cut advanced engineering plastics precisely. While most plastics can be machined with HSS (high-speed steel) cutters, glass-filled plastics need cutters made from carbide (or even ceramic) to counteract the abrasiveness of the glass.
Does acetone dissolve Delrin?
We do not warrant (neither express nor implied) that the information in this chart is accurate or complete or that any material is suitable for any purpose….Acetal and Delrin Chemical Compatibility Chart.
| Chemical | Compatibility |
|---|---|
| Acetic Anhydride | D-Severe Effect |
| Acetone | A-Excellent |
| Acetyl Bromide | N/A |
| Acetyl Chloride (dry) | D-Severe Effect |
What are the different grades of acetal sheets?
Shop for Acetal sheets, rods, and tubes. Best known as Delrin®, acetal comes in homopolymer, copolymer, and filled options. Grades include copolymer, homopolymer, homopolymer filled bearing grade, glass-filled, food grade, and metal and x-ray detectable, and static dissipative.
What is acetal?
What is Acetal? Acetal (polyoxymethylene or POM) is a high strength, low friction, semi-crystalline engineering plastic with low moisture absorption. It has excellent wear and abrasion properties in both wet and dry environments.
What are the different grades of Delrin acetal?
Delrin® 100AF Blend, Delrin® AF DE588, and TECAFORM® HPV13 – are homopolymer filled acetal enhanced bearing and wear grades. Delrin® 570 – is a glass-filled grade acetal that offers enhanced strength and stiffness. Need a grade of acetal you don’t see here? FDA compliant, metal detectable, and x-ray detectable grades are available.
What is the thickness of acetal?
Acetal sheet thicknesses – 0.031 in, 0.062 in, 0.125 in, 0.187 in, 0.250 in, 0.312 in, 0.375 in, 0.500 in, 0.625 in, 0.750 in, 0.875 in, 1 in, 1.250 in, 1.500 in, 1.750 in, 2 in, 2.250 in, 2.500 in, 2.750 in, 3 in, 3.250 in, 3.500 in, 3.750 in, 4 in, 5 in, 6 in