What is an eRouter?
eRouter: An eSAFE device that is implemented in conjunction with the DOCSIS. embedded cable modem.
How do I put my modem in bridge mode?
How to Set Up Bridge Mode
- Open a web browser from the device that’s connected to the network of the router that will run in bridge mode.
- On the login screen, enter the router’s username and password.
- Head over to Settings > Advanced Settings > Advanced Setup > Wireless Bridge.
- Click the Enable Bridge Mode checkbox.
How do I use my modem router as a modem only?
Click or tap ADVANCED > Administration > Router Mode. The Router Mode page displays. Select No and click or tap Apply. Router mode is disabled and your modem router functions as a modem only.
What is bridge mode on a modem?
Configuring a High-Speed Internet modem in Bridge Mode allows your PC, separate router or other device to establish a connection to the Internet. The device usually connects directly behind the High-Speed Internet modem and is configured with the PPPoE (Point-to-Point Protocol over Ethernet) username and password.
Do bridges have IP addresses?
Neither the bridge nor the ports in the virtual machine network, have IP addresses assigned to them, though you may assign IP addresses if you wish during network creation. Bridges are only created for networks with the virtual machine role.
Does a bridge have a MAC address?
The bridge is a logical interface with a MAC address and an MTU (maximum transmission unit). The bridge MTU is the minimum MTU among all its members. By default, the bridge’s MAC address is the MAC address of the first port in the bridge-ports list.
Does a bridge need an IP?
A bridge does not require an ip address. There are many situations in which you won’t have one. However, in many cases you may have one, such as: When the bridge is acting as the default gateway for a group of containers or virtual machines (or even physical interfaces).
How do I set up provisioning mode?
Select the network element in the Network tree or in the Topology Map view, then right-click and choose Mode >Provisioning >5 Minutes, 10 Minutes, or 15 Minutes. Note: Provisioning mode settings are mutually exclusive. Only one time period can be selected.
What is the default provisioning mode timeout value for a device?
48 hours is the default provisioning mode timeout value. You can adjust this timer on a device by setting the ProvisioningMaxMinutes value in the following registry key: HKLM\\Software\\Microsoft\\CCM\\CcmExec.
What is an erouter?
CableLabs developed the eRouter specification to extend address provisioning to devices that employ stateless address auto configuration (SLAAC), a provisioning mode that is not used with DOCSIS. This specification enables cable modem vendors to now deploy gateway devices using these lightweight, dual-stack eRouters.
What happens when provisioning mode is enabled in PSM?
If you configure a network element while provisioning mode is enabled, you will be able to see the new configuration data in PSM very quickly (without having to wait for the asynchronous update from the NE).