What does it mean when your glucose meter says error?
“Err” in the display with a flashing test strip means your blood sugar may be extremely low, or the test strip may be damaged or not properly inserted.
What does error 3 mean on a glucose meter?
“E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred. The following instructions should help you understand what action to take: If your test result matches how you feel, contact your healthcare professional immediately.
What does error 4 mean on blood sugar machine?
Not enough blood or control solution
What it means: One of the following may apply: Not enough blood or control solution was applied or more was added after the meter began to count down. The test strip may have been damaged or moved during testing.
What does error 5 Mean on a glucose meter?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care. Accu-Chek Aviva Meter.
What is error 2 on my one touch?
Do Not use the meter. Contact Customer Service at 1-888-567-3003. Error 2. What it means: Error message could be caused either by a used test strip or a problem with the meter or test strip.
What does err 3 mean?
Error Code 3 is a Windows error code that appears when the computer cannot find the specified path. This can occur for a number of reasons, including a loss of connectivity to a network location.
What does E13 mean on a glucose meter?
Q: What does E13 mean? A: Not enough blood was added to the test strip. Retest with a new test strip.
What does error 4 mean on a one touch?
Error 4. What it means: One of the following may apply: Not enough blood or control solution was applied or more was added after the meter began to count down. The test strip may have been damaged or moved during testing.
What does error 4 mean on my OneTouch?
The OneTouch Verio® Meter displays messages when there are problems with the test strip, with the meter or when your glucose levels are above 600 mg/dL or below 20 mg/dL. Improper use may cause an inaccurate result without producing an error message.
What is error 5 on a one touch?
What it means: The meter has detected a problem with the test strip. Possible cause is test strip damage.
What does E 9 mean on a glucose meter?
the battery is almost out of power
“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.
What is a error 2?
If you have received this warning on your PC, it means that there was a malfunction in your system operation. Error code “error 2” is one of the issues that users may get as a result of incorrect or failed installation or uninstallation of software that may have left invalid entries in system elements.
What is E 1 on Accu Chek?
“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What is E13 error in Accu Chek?
An E13 Error Code indicates a possible hardware or software issue.
What does error 4 mean on one touch Verio Flex?
What it means: One of the following may apply: Not enough blood or control solution was applied or more was added after the meter began to count down. The test strip may have been damaged or moved during testing.
What does error 2 mean on OneTouch Ultra?
Products. OneTouch® Ultra®2 meter. Troubleshooting: The OneTouch® Ultra® 2 Meter displays messages when there are problems with the test strip, with the meter, or when your blood glucose levels are higher than 600 mg/dL or lower than 20 mg/dL. Messages do not appear in all cases when a problem has occurred.