How do I reignite my hot water heater?
While holding the gas switch down or the button, light the pilot. Depending on the model, your water heater may have an igniting button, or you might need to light it manually with a long lighter. Once the pilot light ignites, be sure to continue holding the switch or button for a full minute.
Is it safe to reignite water heater?
Most homeowners can relight a pilot light themselves without any issue, but it’s important to be safe when dealing with a gas-powered hot water heater. You should always proceed with care when relighting a pilot light, since the gas used to power your hot water heater is flammable and potentially dangerous.
Can I light the pilot on a water heater?
Lighting the Pilot Light on an Automatic Hot Water Heater All you have to do is hold the pilot knob down for 30 seconds and hold the ignition button at the same time. You do not need to use a lighter. Your pilot light will turn on!
What if pilot light goes out on water heater?
When the water heater pilot light goes out, first try relighting it, following the directions on the water heater label. If the pilot doesn’t relight, if it goes out right after lighting or if it goes out repeatedly, by far the most common cause is a bad thermocouple.
How much does it cost to relight a pilot light?
The Cost of Relighting the Pilot Light A plumber can help reignite the pilot light. They will charge you an hourly fee of $40 to $150. This is usually a fairly brief project, and may just take an hour.
What happens if the pilot light goes out on a water heater?
If the pilot isn’t lit anymore, then the heater won’t be able to keep the water warm, and you may experience cold water when you take a shower or try to get hot water from the tap. Usually, cold water is a sign that the pilot has gone out, and many will go to check the heater to see if the pilot is no longer lit.
What causes the pilot light to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Is it safe if pilot light goes out?
A pilot light may need to be re-lit from time to time after being extinguished on purpose or by accident. If it is accidentally extinguished, there exists a danger that the gas used to keep the flame lit will continue to vent, possibly into the living space.
Should I turn off water heater if pilot light goes out?
As long as the pilot stays lit, then it’s okay to close up any door or access panel to the heater. The heater needs the main burner to be reignited, so turn the gas valve to the “on” position, and then it’s necessary to adjust the temperature from the lowest setting.
What happens if pilot light goes out?
Your Gas Has Been Shut Off Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
Do I need to turn gas off if pilot light goes out?
If the pilot light of an appliance goes out, turn off the gas at the appliance for several minutes before attempting to re-light it. Instructions should be attached to the appliance.
How do you get a pilot light back on?
How Can I Restart My Pilot Light?
- Step 1: Turn off your furnace.
- Step 2: Locate your gas valve.
- Step 3: Hold down the red button.
- Step 4: Light the pilot light.
- Step 5: Let go of the button.
- Step 6: Turn your gas back on.
- Step 7: Turn your furnace back on.