Does butcher block Make a good workbench?
In fact, a layered butcher block made out of oak is one of the best materials for a garage workbench countertop. Butcher blocks are so common because they last for decades under proper maintenance.
What is a good surface for a workbench?
The Best plywood’s for workbench tops If you are worried about your budget use a softwood type of plywood with a Hard board or MDF top. The best one to use is Baltic Birch or marine grade plywood. You want to use 3/4 inch or thicker sheets of plywood for stability and strength of your work surface.
How do you build a 2×4 countertop?
How to Build a Counter From 2x4s
- Remove the Stud’s Round Edges. Run all of the studs down to 1 1/4 inch in thickness.
- Prepare the Glue. Lay the studs flat across two sawhorses.
- Apply the Glue.
- Install Bar Clamps.
- Remove Residual Glue.
- Set the Counter Over a Cabinet.
- Screw the Counter Into the Cabinet.
- Top With Linseed Oil.
How thick should a butcher block counter top be?
Wood countertop thickness generally ranges from a three-quarter inch to six inches, and butcher block from two inches to 12 inches.
Is it cheaper to make your own butcher block countertops?
When compared with other popular countertop materials like marble, steel, or concrete, butcher block is far more affordable per square foot. It is safe for food and cleaning products.
What type of wood is best for butcher block countertops?
Maple
Butcher block can be made from nearly any wood. Maple is one of the best and most popular for butcher block counters because it’s hard and has a clear grain. Cherry and red oak offer rich color.
How do butcher block countertops hold up?
They Are Extremely Durable and Last for Years One of the biggest benefits of butcher block countertops is their high level of durability. They are known to have a lifespan of twenty years (or longer, with proper maintenance). Butcher block countertops are built to withstand heavy daily use and food preparation.
What should I seal my workbench with?
Tim Inman: For a shop workbench, I would put on a thinned coat of polyurethane varnish. Not much will stick to poly, and you will certainly have spilled glue, oil, nondescript goo, and other things on the bench over the years. The poly will let you clean up pretty well. A good coat of wax is another option.