What is the diameter of a 12 inch subwoofer?
12W0v3-4 12-inch (300 mm) Subwoofer Driver, 4 Ω
| Nominal Diameter | 12.0 in / 300 mm |
|---|---|
| Overall Diameter (A) | 12.52 in / 318 mm |
| Mounting Hole Diameter (B) | 11.0625 in / 281 mm |
| Bolt Hole Circle Diameter (C) | 11.7 in / 297 mm |
| Motor Outer Diameter (D) | 5.05 in / 128 mm |
How are woofers measured?
Normally, the way to measure this is from the high points on the surround that encircles the diaphragm and connects it to the loudspeaker frame. As you can see in that same drawing, this diameter is 258.8 mm, which, in the “official” datasheet is rounded to 260 mm.
What are sub sizes?
The Three Most Common Sizes of Subwoofers
- 8-inch subwoofers. This size is typically best suited for the sound enthusiast who isn’t looking for a sub with a lot of low frequency power, but still has enough punch for bass to sound good.
- 10-inch subwoofers.
- 12-inch subwoofers.
What are the dimensions for a 12 inch subwoofer box?
Enclosure Measurements: Type of Enclosure: Sealed. Enclosure Sub Size: Single 12″ Dimensions in Inches: 13.2″ L x 13.2″ W x 13.2 H”
Is my room too small for a subwoofer?
Arguably a sub is more important in a small room since modes are likely to be closer-spaced and deeper than in a larger room with more “stuff”. If you can place a subwoofer properly/optimally in the room you should have much flatter bass response.
How is bass sound measured?
Subwoofer Reviews The process is simple. Use audio-spectrum-analyzer software that runs on your computer or smartphone. Set up a test microphone (or hold your smartphone) in your listening position. Play the appropriate test tone and you’ll see the level of each frequency of sound onscreen.
What are the dimensions for 2 12 inch subwoofer box?
Enclosure Measurements: Type of Enclosure: Vented. Enclosure Sub Size: Dual 12″ Dimensions in Inches: 17.75″ L x 30.25″ W x 13.75 H”
What is the diameter of a 10 inch subwoofer?
10W0v3-4 10-inch (250 mm) Subwoofer Driver, 4 Ω
| Nominal Diameter | 10.0 in / 250 mm |
|---|---|
| Overall Diameter (A) | 10.52 in / 267 mm |
| Mounting Hole Diameter (B) | 9.0625 in / 230 mm |
| Bolt Hole Circle Diameter (C) | 9.7 in / 246.5 mm |
| Motor Outer Diameter (D) | 5.05 in / 128 mm |
Are two subs louder than one?
It will be more powerfull, maybe +3dB, which may or may not be noticeable. But, it will create a better sound in your area. Two subs compared to one usually eliminate any dead spots you may have in your room. The bass should be smoother and more balanced, while being slightly louder and easier to feel.