Which striking tool is used for forcible entry?
Examples of striking tools are sledgehammers (8, 10, or 16 pounds), mauls, battering rams, picks, flat-head axes, mallets or hammers, punches and chisels.
What is a firefighter K-Tool?
The K-tool is a tool used by many fire departments for forcible entry. It is used in conjunction with a Halligan bar and a flat-headed axe or maul (commonly referred to as “irons” or (with a maul instead of an axe) “heavy irons”) to remove a cylinder lock.
What tools do firefighters carry on them?
Of course, generally speaking, there are some items that most, if not all, firefighters carry: a radio, a flashlight, cable/wire cutters, webbing, a door chock/wedge, a pocket knife, a screwdriver, etc. All of our contributors listed these items as necessary.
What do firefighters carry in their pockets?
Tools carried in pants pocket include spare work gloves (not for firefighting), door chocks, extra cutting pliers, and a search line. Tools carried in bunker coat pocket include webbing, a search/utility line for controlling doors, nails(Used as door chocks), wire cutters, utility knife and small spare light.
What are 5 of the tools most commonly used for forcible entry?
There are five (5) different groups of forcible entry tools; striking, prying, cutting, pulling, and through the lock.
What are five of the tools most commonly used for forcible entry?
What is a Chicago bar tool?
Chicago Bar – A forcible entry tool created in Chicago to assist in forcing of doors, bars etc. Cockloft – Structural space above the ceiling and below the rafters, often connecting adjacent occupancies and permitting fire to spread laterally, often unseen.
Why do firefighters have nails on their helmets?
Two or three can be carried easily in a pocket or on a helmet. Tees can be used as temporary plugs to stop leaks caused by small holes in gas tanks or hoses. In addition, some firefighters use small nails to prop open doors, but golf tees can perform the same function.
Why are firefighter hats backwards?
The rear of the helmet, also known as the duckbill or beavertail was elongated and its purpose was to keep water and hot embers from running down the wearers back. Firefighters were known to put the helmets on backwards to use the duckbill to shield their faces from the heat of the fire.