Can you screw NoMorePly?
No More Ply Screws are galvanised, self drilling, self countersinking screws designed for use with No More Ply Cement Tile Backer board and the 22mm No More Ply Tongue & Groove Board.
How many screws do you need for no ply board?
Wipe off excess adhesive using a cloth and use solvent in case of spillage. When boards have straddled both solid and timber flooring, use 6 to 8 screws per board to secure into any timber floorboards. Now you’re ready to tile! 6mm NoMorePly is ideal for covering dirty, cracked, worn out concrete floors.
Do you have to prime NoMorePly?
No More Ply Tilers Primer is an SBR latex based primer which should be applied to No More Ply boards to improve the bonding strength of the tile adhesive. It should also be used to provide a waterproof coating to No More Ply boards when used in wetrooms or bathrooms.
Can you walk on NoMorePly?
Supporting even the heaviest of tiles, the board creates the perfect tiling surface, preventing potential problems when tiling directly onto plywood or plasterboard. No More Ply is movement free, which reduces the risk of cracked tiles.
What glue NoMorePly?
Mega Strength Adhesive is a polyurethane high strength adhesive used for the fixing of No More Ply boards to various substrates. This high strength adhesive is fast setting (5-10mins) waterproof and provides a very strong , high performing bond.
Is NoMorePly any good?
Insulative – No More Ply will act as an insulator so is perfect for laying underfloor heating over. Shockproof – Highly resistant to impact, No More Ply provides excellent resistance to impact when being worked over.
Can NoMorePly be used on walls?
12mm No More Ply is ideal for modern large format tiles which cannot be installed over traditional plaster finished walls.
How long can you leave primer before tiling?
The render must be cured for at least 7 days before tiling.
How do you cut tiler plywood?
For round holes or complicated and awkward cuts in the cement board we recommend using a masonry drill bit attached to a drill to drill through the board, then using a heavy duty jigsaw with the No More Ply TCT (tungsten carbide tipped) Jigsaw Blade to cut through the board and cut it to your desired shape.
Is it better to nail or screw plywood?
To start with, most experts recommend screws over nails when working with plywood. Nevertheless, there are many projects built using nails with plywood. In most cases, the nails used are from a pneumatic finish nailer and are used in conjunction with wood glue.
Should you pre-drill plywood?
Our first recommendation is to pre-drill if you are going to be screwing something into the edge of the plywood. The sheets of ply have a habit of separating when screws are inserted or even large nails. However, if you get the ball rolling with a little bit of pre-drilling this issue disappears completely.
Is thin set a mortar?
Thinset is an adhesive cement used to secure floor and wall tiles to concrete surfaces. The word “thinset” is sometimes used interchangeably with “mortar,” because it’s a type of modified mortar made specifically for tile.
Are NoMorePly boards waterproof?
6mm PrePrimed NoMorePly is also water-resistant, unlike plywood which weakens when damp. Plus, it’s also A1 fre rated for your peace of mind. Using Mega Strength polyurethane adhesive to fix boards makes installation quick and now being already primed, NoMorePly boards are the fastest to fit in the market.
Should I PVA a wall before tiling?
No, you should never use PVA to prime a surface before tiling. PVA (Polyvinyl Acetate) is often used to seal things, or used as a glue in crafts and woodworking but should not be used as a sealer before tiling.
Should I prime plywood before tiling?
If tiling on fibre-reinforced cement sheets, or plywood/chipboard, then we would always recommend priming the reverse side and edges with BAL Bond SBR. This helps protect the plywood from moisture penetration which could cause the board to swell.
What do you put on plywood before tiling?
Thinset is the wet base that you first trowel on the plywood to make the tile stick. Higher latex content is essential for bonding to plywood. A quality unmodified thinset should be used and mixed with a latex additive.
Do you need to pre-drill plywood?
How do I install my no more Ply Boards?
The 6mm board is great for overboarding wooden or concrete floors. Whereas the 9mm and 12mm boards are ideal for boarding vertical studs before tiling. Follow our step-by-step instructions to install your No More Ply boards correctly. 1. Start by priming the walls and then both sides of the No More Ply board with 1 coat of SBR primer.
Can 6mm nomoreply boards be installed straight to joists?
No, 6mm NoMorePly boards are not structural boards and cannot be installed straight to joists. They need to be installed on top of an existing floor to strengthen the floor, rather than replacing the floorboards. Our 22mm fibre cement board can be installed straight to joists and has been developed as a direct replacement for floorboards.
What is no more ply?
What is No More Ply? No More Ply is an extremely strong cement-based board that is quick and easy to fit. Supporting even the heaviest of tiles, the board creates the perfect tiling surface, preventing potential problems when tiling directly onto plywood or plasterboard. No More Ply is movement free, which reduces the risk of cracked tiles.
How do you use no more ply flooring?
For straight cuts, simply score and snap with a No More Ply scoring knife, you can use tile nippers for cutting around pipes. 6. Once the adhesive is set, prime the boards with a coat of SBR. Once your No More Ply boards are installed, you are ready to tile your wall or floor.