Why is my Oki printer not working?
Check that the same IP address is set for the machine and the machine’s port setting on the computer. Check that the IP address is not duplicated by another device. Check that the correct IP address, subnet mask, and gateway address are set. If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.
How do I reset my Okidata printer?
ANSWER
- Run the printer menu setup tool. Select [Start] – [All Programs] ([All Programs] except on Windows XP/Server 2003])-[Okidata]- [OKI B410 Printer Menu Setup Tool]-[Printer Menu Setup Tool].
- Click [+] to the left of [Maintenance Menu]. Click [MENU RESET], and then click the [EXECUTE] button. Note.
How do I reset my Oki b4600 printer?
Press the “Item” button repeatedly until “Drum Counter Reset” displays on the screen. The “Item” button is directly to the right of the “Menu” button.
Why is my Okidata printer offline?
There may be a problem with a cable. Replace the cable with a new cable. The machine is offline. Press the (PRINT) button, and then select [Online/Offline].
How do I install OKI printer in Windows 10?
- Click [Start], and then select [Devices and Printers].
- Right-click [OKI MC573], and then select [OKI MC573 PS] from [Printer properties].
- Select the [Device Settings] tab.
- Select [Get installed options automatically] for [Installable Options], and then click [Setup]. Memo.
- Click [OK].
How do I reset my Oki toner?
Answer
- Press Menu = printer displays “Paper Menu”
- Press Next 4x = printer displays “System Menu”
- Press Select 1x = printer displays “Factory Defaults”
- Press Next 7x = printer displays “Reset Toner Life”
- Press Select 1x = printer displays “Resetting Toner Page Count”
- Press Ready.
How do I reset my Oki drum counter?
ANSWER
- Start the Status Monitor for the printer.
- Click on Printer Setup tab – Printer Menu button – Maintenance 1 tab.
- Click the [Reset] button next to Drum Counter, then click on the [OK] button to reset the drum counter.
How do you clean Oki printer rollers?
Cleaning the Document Feed Rollers and Document Holding Rollers
- Check the ADF cover.
- Pull the ADF cover open lever (D) and open the ADF cover.
- Open the Roller cover.
- Wipe the document feeding rollers with a soft cloth lightly moistened with water.
- Push and close the Roller cover.
- Close the ADF cover.
How do I clean the drum on my Oki printer?
ANSWER
- Insert your finger into the recess on the right side of the machine and pull the front cover open lever (1) to open the front cover (2) forward.
- Press the open button (3) and open the output tray (4).
- Remove the image drum.
- Wipe the light-shielding film (5) with soft tissue paper.