What does the Virginia DEQ do?
About the Agency The Department Environmental Quality (DEQ) administers state and federal laws and regulations for air quality, water quality, water supply and land protection.
What is the meaning SWPPP?
The acronym “SWPPP” stands for Storm Water Pollution Prevention Plan. SWPPPs are commonly associated with construction and industrial stormwater permits, which are issued by the Regional Water Quality Control Board.
What counties require emissions in VA?
Virginia Emissions Inspection An emissions inspection is required every two years by the Commonwealth of Virginia for qualifying vehicles garaged in the counties of Arlington, Fairfax, Loudoun, Prince William or Stafford or the cities of Alexandria, Fairfax, Falls Church, Manassas or Manassas Park.
Is safety inspection required in Virginia?
Obtain a Vehicle Safety Inspection Sticker Before operating a vehicle in Virginia, it must pass an annual safety inspection and display a valid safety inspection sticker. Be warned: if you drive your vehicle without an inspection sticker, you may be ticketed by law enforcement.
How old does a car have to be to not need inspection in VA?
Nearly Every Vehicle Needs an Inspection Each Year Antique vehicles that are 25 years or older and registered as an antique with the DMV do not have to be safety inspected, unless you drive the vehicle regularly. New automobiles purchased in Virginia are also exempt from safety inspections for one year.
Is Virginia getting rid of state inspections?
The proposal to eliminate the vehicle safety inspections in Virginia was part of the governor’s $135 billion budget proposal for 2020-2022. That means it has a long way to go before becoming reality if it passes at all.
What will fail a Virginia state inspection?
It all revolves around safety. One factor to take into serious consideration is your tire tread depth. The tread on most new tires is anywhere from 10/32 of an inch to 11/32 of an inch. You will fail your Virginia vehicle inspection when your tread depth is below 2/32 of an inch.
Are ball joints part of VA inspection?
Ball joints without wear indicators (front and rear). 1. If play is detected in any ball joint without “wear-indicating” ball joints, it will be necessary for the inspection to be made in accordance with the manufacturer’s recommended procedures and specifications prior to rejecting the vehicle. 2.
Who is responsible for a swppp inspection?
G. SWPPP Inspections. 1. Personnel responsible for on-site and off-site inspections. Inspections required by this general permit shall be conducted by the qualified personnel identified by the operator in the SWPPP. The operator is responsible for ensuring that the qualified personnel conduct the inspection.
What does the swppp do for the site?
Necessary permanent control measures included in the SWPPP for the site are in place and functioning effectively and final stabilization has been achieved on all portions of the site for which the operator has operational control.
What is a revision to the swppp?
Revisions to the SWPPP shall include additional or modified control measures designed and implemented to correct problems identified. If approval by the VESCP authority, VSMP authority, or department is necessary for the control measure, revisions to the SWPPP shall be completed no later than seven calendar days following approval.
How long does a swppp inspection report last?
6. The inspection report and any actions taken in accordance with Part II shall be retained by the operator as part of the SWPPP for at least three years from the date that general permit coverage expires or is terminated. The inspection report shall identify any incidents of noncompliance.