How do you maintain an electric log splitter?
Instructions
- Step 1 – Check for leaking hydraulic fluid.
- Step 2 – Fill hydraulic fluid reservoir.
- Step 3 – Remove air from the hydraulic cylinder.
- Step 4 – LUBRICATE BEAM.
- Step 5 – Clean the log splitter regularly.
- Step 6 – Store your hydraulic log splitter in a dry area.
- Step 7 – Replace worn log splitter parts.
Are log splitters safe?
Always wear sturdy shoes or boots, and safety glasses or goggles. When wood splits, sometimes pieces fly. Never wear jewelry or loose clothing that might get caught in the log splitter. Make sure the beam is locked before starting.
Why is my wood splitter not working?
Check the level and top it off if needed. If the levels are correct, then you may have air in the lines. To fix this problem open the bleed valve and cycle the pressure plate back and forth a few times. Always recheck your oil levels after doing this and re-tighten the bleed valve.
What benefits do kinetic log splitters offer to customers?
The biggest and most commonly considered advantage of kinetic splitters is their speed.
- Kinetic splitters are fast.
- Keep in mind, the high speed is the reason that you won’t always see a tonnage rating for a kinetic splitter.
- They also don’t need hydraulic fluid.
Why does log splitter lose power?
Temperature could also be the culprit for loss of driving force, as hydraulic oil is more viscose in cold weather resulting in a weak response until the machine warms up. If it is not any of the above, then the log splitting machine may require a piston or pump replacement.
Do electric log splitters need hydraulic fluid?
Electric log splitters require hydraulic oil with a 10W (Winter) weight rating. This hydraulic oil type provides lubrication for gears and other mechanical parts during extreme cold and heat, effectively protecting parts from wearing down.
How long can you run a log splitter?
Most standard hydraulic splitters can have cycle times between 10 and 20 seconds which will suit most people. Sometimes a slower cycle time comes with added force so you can split a much larger and knotted log you normally couldn’t.
How do you bleed an electric log splitter?
But you can also follow these steps to bleed the air out:
- Please, put on your safety goggles.
- Turn the oil-filler plug counter-clockwise to remove the oil filling plug from a log splitter.
- Release the ram by rotating the release screw counter-clockwise.
- Now, replace the oil filling plug onto the splitter again.
How do you sharpen a hydraulic log splitter wedge?
- Examine the wedge for signs of excessive wear or cracking. A wedge may develop cracks over the course of normal use.
- Evaluate the condition of the splitting point of the wedge.
- File the entire splitting point of the wedge with the coarse metal file.
- Sharpen the splitting point with a fine metal file.
How do you bleed air from a hydraulic log splitter?
What are the common hydraulic issues in log splitters?
Hydraulic issues in log splitters are typical like vibration or shaking, log splitter will not retract, etc. They are relatively easy to locate and troubleshoot. Hydraulic systems are based on the mechanism where a pressurized fluid is released, which acts as the driving force and powers the machine to split the log.
How does a log splitter work?
Every log splitter comes with a user manual where you can get all the information including how much and how often the pump requires to fill with fluid. The main task of the hydraulic pump is to control the flow of the fluid throughout the hydraulic system.
Why is my log splitter bogging down my engine?
These clogging block the flow of air and bog down the engine. Hydraulic issues in log splitters are typical like vibration or shaking, log splitter will not retract, etc. They are relatively easy to locate and troubleshoot.
What to do if your log splitter is not working?
After using the log-splitter, do not forget to clean the air filters and change them if you notice sawdust clogging. These clogging block the flow of air and bog down the engine. Hydraulic issues in log splitters are typical like vibration or shaking, log splitter will not retract, etc. They are relatively easy to locate and troubleshoot.