What vehicles came with a T10 transmission?
Ford installed it in their full-size models (both Ford and Mercury), Mustangs, Falcons, Comets and Fairlanes until ’65. AMC continued to use it in their Javelin and AMX cars until ’74. Borg Warner started supplying to the original equipment market again in the early ’70s with its release of the Super T-10.
How do I identify my GM manual transmission?
While there are no distinctive pans and bolt counts to make transmission identification simple, 4-speed manual transmissions can be generally identified by examining the side profile. The shape of the main housing will give a reasonably reliable indication of the transmission group to which your gearbox belongs.
How do I know what Borg Warner 4 speed I have?
The easiest way is by knowing the construction of each unit, and the differences are obvious. If the case and side cover are made of cast iron, that would make it a Saginaw transmission. If it has a cast-iron case with an aluminum side cover and tail housing, that will mean you have found a Borg Warner.
How much does a T10 transmission weigh?
A dry weight Super T-10 weighs 70 lbs while a dry weight Turbo 350 weighs 120 Lbs. The super T-10 takes about 1.5 quarts of gear oil while a Turbo 350 takes 11-12 quarts of automatic transmission fluid.
Who made Saginaw transmissions?
General Motors
The Saginaw Michigan SM465 is a heavy-duty, four-speed manual transmission built by General Motors for use in light and medium duty trucks from 1968 to 1991 at the factory in [Muncie, Indiana]it was designed to replace the somewhat similar Muncie SM420 transmission, which had been in production since just after World …
How do I identify a Borg Warner T10 transmission?
Look for casting identification on the transmission casing. According to Drivetrain.com, the “T10” designation and the code, “13-04,” is sometimes cast on the transmission housing. Count the cross-grooves on the input shaft. The input shaft enters the engine at the front of the transmission.
Is Tremec a Ford?
Ford has used Tremec transmissions in some of its vehicles for years now, including the 2021 Ford Mustang Mach 1, which comes equipped with that company’s TR-3160 six-speed manual transmission instead of Getrag’s much-maligned MT-82 six-speed manual.
What kind of gear does a T10 transmission have?
T10 thrust bearing for all GM & Ford T10 transmissions. 3rd Gear with 28 teeth for T10, used mainly in Ford applications. New T10 3rd gear with 29 teeth. T10 Bushed 3rd gear with 29T. Reverse idler gear with 19 teeth fits all T10’s 1957-1964 and Super T10’s from 1974-79 with thrust washer. Does not fit Super T10’s that utilize the thrust bearing.
Will a reverse idler shaft fit a T10 transmission?
Reverse idler gear with 19 teeth fits all T10’s 1957-1964 and Super T10’s from 1974-79 with thrust washer. Does not fit Super T10’s that utilize the thrust bearing. Reverse Idler shaft for all T10 or Super T10 transmissions. USA Made.
Is there a complete gasket set for a T10 transmission?
Complete gasket set for all T10 & Super T10 transmissions. This is a complete gasket, seal and bushing kit for all Ford T10 transmissions. Complete gasket, seal and bushing kit for all GM T10 transmissions.
Will torque lock slider fit a T10 transmission?
Torque Lock Slider fits all T10 transmissions, except AMC. AMC t10’s use the Super T10 type slider. From $45.50 T10 synchronizer assembly. NOTE: If the T10 is an AMC application you must use the Super T10 style synchronizer assemblies.