What is Nylatron 703XL?
Nylatron® 703XL Polyamide Type 6 is an ultra-high performance bearing grade of PA6 provides wear resistance near the levels of Nylatron® NSM with superior load bearing capability and an industry first – a near zero level of “stick-slip.” This elimination of chatter provides an extraordinary amount of control for high- …
What is Nylatron material?
Nylatron® is a tradename for a family of nylon plastics, typically filled with molybdenum disulfide lubricant powder. It is used to cast plastic parts for machines, because of its mechanical properties and wear resistance.
What is the difference between nylon and Nylatron?
Nylatron® MD is a metal detectable grade of nylon offering improved strength and rigidity. With a lower coefficient of linear thermal expansion than Nylon 101, Nylatron MD parts maintain better fit and clearances, and have less tendency to seize as bearings.
What is different about Nylatron from regular nylon?
Nylatron® GS Nylon With a lower coefficient of linear thermal expansion than Nylon 101, Nylatron GS parts maintain better fit and clearances, and have less tendency to seize as bearings.
Does Nylatron absorb water?
When under high humidity, or while submerged in water, Nylons can absorb up to 7% by weight of water. This is important to keep in mind for machining Nylatron and designing applications of the material, as this effect can result in dimensional changes and a reduction of physical properties.
What is a Nylatron washer?
Nylatron® MDS is an extruded “moly” filled nylon 6/6, which is gray in color. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate.
Who makes Nylatron GS?
Nylatron GS Type 6/6 Extruded Moly Filled | Boedeker.
What color is Nylatron GS?
grey-black
*Nylatron® GSM* contains finely divided particles of molybdenum disulphide (MoS2) to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets and custom parts. It is grey-black in color.
What is GSM nylon?
Nylatron GSM contains finely divided particles of molybdenum disulphide to enhance its bearing and wear behaviour without impairing the impact and fatigue resistance inherent to unmodified cast nylon grades. It is a very commonly used grade for gears, bearings, sprockets and sheaves. Producto Data Sheet.
What is the difference between Nylatron 703xl and mc901?
Nylatron 703XL possesses a good balance of strength and toughness, as well as good mechanical and electrical properties. This grade works well in critical bearing applications for construction and production equipment industries. Nylatron MC901 is a heat-stabilized Nylon 6 grade that offers long-term thermal stability to 260 °F.
What are the advantages of 703xl Nylatron?
Nylatron 703XL possesses a good balance of strength and toughness, as well as good mechanical and electrical properties. This grade works well in critical bearing applications for construction and production equipment industries.
What is Nylatron NSM?
Nylatron NSM is the highest wear resistant thermoplastic available. As a self-lubricating grade of Nylon 6, it’s designed to outperform other wear grade materials and give long-lasting part life for applications that otherwise experience continuous wear and damage, such as bearings and wear pads.
What is Nylatron used for in industrial applications?
This grade is often used to replace cast iron industrial applications, as lightweight Nylatron can both reduce weight and eliminate corrosion. As a result, it’s commonly used for gears, bearings, sprockets and sheaves.