How much HP does a Tomei exhaust add WRX?
The Expreme Ti exhaust showed a 6.5whp improvement for a maximum 284.04whp at 5,600 RPM and a 11.94 lb-ft torque improvement for a maximum 295.11 lb-ft at 3,900 lb-ft. The most improvement lay within the 3,500 RPM to 4,500 RPM range with approximately 20 lb-ft increase in torque.
Do I need an adapter for Tomei exhaust?
A: You will need an adapter from the OEM 2.5″ downpipe/jpipe to aftermarket 3″ catback.
How big is the Tomei exhaust?
A: The Tomei is 115mm in diameter for the tip, the piping diameter is about 75mm or close to 3 inches.
How loud is the Tomei Expreme TI?
At 5250rpm, Tomei’s data showed a measure of 104db. Although it’s fairly loud, it’s a deep exhaust note that’s not at all annoying, and far better than what you’ll get from fart cans. It’s like comparing Boys II Men’s baritone, Nathan Morris, to Rebecca Black’s whiny vocals.
How loud is the Tomei Expreme Ti?
Why are Tomei exhaust so popular?
Because Tomei uses titanium in the Expreme Ti lineup, the 80R exhaust is extremely lightweight. Tomei weighed the exhaust at 16 pounds, which is about 22 pounds lighter than the factory exhaust. The Tomei 80R just straight up looks good. From the heat gradation to the welds, the craftsmanship is on another level.
Is Tomei too loud?
At 5250rpm, Tomei’s data showed a measure of 104db. Although it’s fairly loud, it’s a deep exhaust note that’s not at all annoying, and far better than what you’ll get from fart cans.
Is Tomei USA the same as Tomei Japan?
So tomei usa was contracted to sell and make parts for the us market. Any part number you see that starts with a t was made by tomei usa. Tomei japan found out that the parts were being made sub par and cut all ties with tomei usa. Now they are separate entities.
Is Tomei a Japanese brand?
Tomei manufactures a large range of high quality, high performance parts for a large range of Japanese vehicles. All parts are designed and manufactured on-site in Japan at the Tomei facility.