How do you change the sound on Alesis DM10?
Under the EDIT section press the INST button. Next press F1(INST) which will open the Instrument Edit window. Then press F2(LVL). This will bring you to the instrument edit section that will allow you to choose an instrument and adjust the sound levels.
How do I program my Alesis DM10?
Global Settings
- Power on the DM10 module.
- From the Main screen, press the UTILITY button.
- Now press F4 SYS.
- Next, press F2 INIT.
- Use the CURSOR buttons to highlight the kit.
- Once the correct kit is listed, press F4 EXEC.
- Now, press the DRUM KIT button to get back to the main screen.
How do you reset alesis Turbo drum module?
Can I reset the module to its factory default settings? Yes. Hold the < and > arrow buttons simultaneously while powering on the unit. The screen will show “RST—” for one second and then the module will restore back to the factory default settings and be ready to use.
What is a bass drum trigger?
In drumming, a trigger is an electronic transducer that can be attached to a drum, cymbal or other instrument to enable it to control an electronic drum unit or similar device.
How do I connect my Alesis drums to my computer?
Setup
- Connect the DM10 module to your computer using a USB Cable and turn it on.
- Open up the DAW of your choice.
- For Ableton, hold down on the left click on your mouse and then drag the Addictive Drums Plug-In into the Mixer Window to the right.
How do I reset my Alesis?
Performing the Factory Reset
- Turn off the module.
- Press and hold the Stop and Enter buttons while powering up the module. “Resetting Factory Defaults…” will be displayed on the module.
- Wait 5 seconds, then let go of the buttons.
- That’s it! Your Strike Module has now been restored to the factory default settings!
How do I connect my Alesis to my laptop?
Why is my electric drum set not working?
If a drum pad isn’t triggering or is triggering intermittently, the first step is to check the cables and the pads. First, disconnect and reconnect the cable and make sure it’s inserted all the way. If that doesn’t work, connect the cable from the faulty trigger to a pad that is working.
What is the Alesis DM10 drum module?
INTRODUCTION Welcome to the Alesis DM10 drum module! The DM10 includes lots of high-fidelity drum, percussion, and accompaniment sounds giving you the sonic realism of acoustic drums but with the convenience and flexibility of electronic drums. This manual details all the DM10 module’s features.
What are the DM10 preset kits and user kits?
The DM10 Module has 100 Preset Kits and 100 User Kits, which you can select from the Main Screen. Each Kit is a collection of Voices – or drum sounds – that are assigned to each TRIGGER INPUT on the DM10 module’s rear panel.
How do I edit an accompaniment in the DM10 module?
The DM10 Module has 100 Preset Kits and 100 User Kits, which you can select from the Main Screen. Each Kit is a collection of Voices – or drum sounds – that are assigned to each TRIGGER INPUT on the DM10 module’s rear panel. EDITING ACCOMPANIMENT IN A KIT When you are in the Kit whose Accompaniment you want to edit, press EDIT ACCOMP.
What is the DM10 module used for?
This can be useful when programming the DM10 if it is not connected to your drum kit, if it is not convenient to strike the pads, etc. The DM10 Module has 100 Preset Kits and 100 User Kits, which you can select from the Main Screen.