What size is a Ford stud pattern?
Find Your Stud Pattern
| Stud Pattern | Stud PCD | Common Stud Size |
|---|---|---|
| FORD | 5 x 114.3mm | 1/2″ |
| COMMODORE | 5 x 120mm | 7/16″ |
| HQ HOLDEN | 5 x 120.65mm | 7/16″ |
| HT HOLDEN | 5 x 108mm | 7/16″ |
What size are AU Falcon rims?
Ford Falcon Wheel Size
| Year | Body Type | Front Rim |
|---|---|---|
| 2017 | Ute | 16×6.5 inches |
| 2017 | Sedan | 18×8 inches |
| 2016 | Ute | 16×6.5 inches |
| 2016 | Sedan | 18×8 inches |
How do I work out stud pattern?
Find Your Stud Pattern If you have an odd number of studs you must measure from the centre of one stud, to the furthest edge of the opposite stud. For an even stud pattern (4 or 6 studs) You can simply measure from the centre of one stud to the centre of the opposite stud.
What size tires are on a Ford Falcon?
Tyre Size: 235/45R17 93W.
What is the PCD of Ford wheels?
Stud pattern identification
| Type | No. of studs | PCD (inches) |
|---|---|---|
| Ford 100 | 5 | 5.5 |
| LandCruiser | 6 | 5.5 |
| LandCruiser | 5 | 5.91 |
| Nissan | 6 | 5.5 |
What is Ford wheel bolt pattern?
When it comes to Ford wheels (including Mercury and Lincoln), it also comes down to two common five lug bolt patterns, 5×4-1/2 and 5×5-1/2, although Ford did produce a few passenger cars with 5×5-inch bolt pattern.
How do you measure a 4 lug pattern?
4-bolt patterns are measured in a straight line from center to center of two bolt holes sitting directly across from each other. 5-bolt patterns can be more difficult to measure since the bolt holes are not directly across from each other.
What cars are 5×114 3 bolt pattern?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
What is 5×4 bolt pattern?
Small Ford Pattern | 5 on 4.5 inches The 5×4. 5-inch bolt pattern is typically known as a “small Ford” pattern and can also be listed as 5×4-1/2 inches.
Do all falcons have the same stud pattern?
All falcons have the same stud pattern (5×114.3) as you mentioned, but its the offset thats different. Hope that helps. The car is written off . It only has to have wheels , do they have to be the correct ones? as long as they bult on and rotate!
How do you find the pattern of a stud?
For even stud holes such as 4 or 6 stud patterns, simply measure from the center of one stud, to the center of the opposite stud. Compare your measurements to the stud PCD column in the table below to find your stud pattern.
How do you find the correct studs for axles?
When it comes to finding the correct fittings for your axles, it is important to know your required stud pattern to match the wheel pattern. For uneven stud holes such as 5 stud patterns, measure from the center of one stud, to the furthest edge of the most opposite stud.
How do you measure a 5 stud stud hole?
For uneven stud holes such as 5 stud patterns, measure from the center of one stud, to the furthest edge of the most opposite stud. For even stud holes such as 4 or 6 stud patterns, simply measure from the center of one stud, to the center of the opposite stud.