Are JIC and SAE interchangeable?
SAE and AN/JIC fittings are completely incompatible due to the different flare angle. Furthermore, AN fittings (or those complying with subsequent standards) and JIC fittings are not interchangeable for design-controlled applications due to differing quality standards.
Is JIC 37 or 45?
The JIC female has straight threads and a 37° flare seat. The Seal is made on the 37° flare seat. The SAE 45° flare male will mate with an SAE 45° flare female only. The SAE male has straight threads and a 45° flare seat.
Will a 45 degree flare work on a 37 degree fitting?
Note that 37° AN and 45° SAE fittings and tooling are not interchangeable due to the different flaring angles. Mixing them can cause leakage at the flare.
What is JIC 37?
JIC (or Joint Industry Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel. JIC Fitting hydraulic connections are common in most fluid power systems.
What is the difference between JIC and SAE fittings?
JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. SAE 45-degree flare fittings are similar in appearance, but are not interchangeable, though dash sizes 2, 3, 4, 5, 8, 10, 14, and 16 share the same thread size.
Is SAE and flare the same?
SAE 45° flare connections are commonly used in automotive applications as well as for refrigeration and air conditioning. SAE fittings are typically made from brass. SAE and AN/JIC connections are incompatible due to the different flare angle.
What is a SAE fitting?
SAE(SAE J512)stands for the Society of Automotive Engineers. SAE fittings are mostly used in refrigeration, automotive piping systems and other low-pressure applications. It’s common for copper tubes to be used with SAE threads. SAE Flare The SAE male and female halves both have a 45° flare seat.
What is meant by JIC?
JIC means “just in case.” It’s commonly used to share a piece of information or convince someone of an action that probably won’t be necessary but might be.
What is SAE flare?
SAE 45° Fittings Flare fittings are a type of compression fitting used with metal tubing, usually soft steel and ductile (soft) copper, though other materials are also used. Tube flaring is considered to be a type of forging operation, and is usually a cold working procedure.
Are the JIC 37 and SAE 45 fittings interchangeable?
they doesn’t interchangeable into each other. Jiayuan also can offer JIC 37 flare and SAE 45 flare type fittings. Flared fittings vs flareless fittings compressi…
What is the difference between JIC 37° and 45° flares?
JIC 37° Flare Fitting JIC 37° Flare Fitting The JIC 37° flare male will mate with a JIC female only. The JIC male has straight threads and wa 37° flare seat. The JIC female has straight threads and a 37° flare seat. The Seal is made on the 37° flare seat. Some sizes have the same threads as the SAE 45° flare.
What is the difference between the SAE 45° and 45° flare fittings?
SAE 45° Flare Fitting The SAE 45° flare male will mate with an SAE 45° flare female only. The SAE male has straight threads and a 45° flare seat. The SAE female has straight threads and a 45° flare seat. The Seal is made on the 45° flare seat.
What is the difference between a 45 and 37 degree flare?
The refrigeration and air conditioning industry usually uses 45° flare connections while hydraulic hoses are usually 37-1/2° flare connections. Note that 37° AN and 45° SAE fittings and tooling are also not interchangeable due to the different flaring angles.