How do you clear the error code on a Whirlpool Cabrio washer?
First press PAUSE/CANCEL once to clear the Fault code from the Cabrio display. If code appears again put it through an automatic diagnostic cycle while you enjoy a nice soothing cup of tea. (Watch The Cabrio Diagnostics Video); This will reveal any stored Fault codes.
How do I program my Whirlpool microwave?
For list of preset programs, see the Cooking Guide label on the front facing of the microwave oven opening, behind the door. Touch COOK TIME, touch number keypads to enter time, touch COOK POWER (if not 100%), touch number keypads to enter power level (10-90), then touch the Start control.
What does the F error code mean on a Whirlpool washer?
The error code F appears on the washer’s display when the main control board has failed. The board failure results in all other components and systems halting operations because of the control board’s inability to send signals to different washer components.
Why is my Whirlpool microwave not working?
Verify the power cord is connected to a grounded, operational outlet. Check the outlet. If you are unaware if it’s working, plug in a household lamp or other small appliance to verify that the outlet is working. Check to see if a household circuit breaker has tripped or if the household fuse has been blown.
How do I reset my Whirlpool washing machine?
Follow these steps to reset your Whirlpool washer:
- Turn the washing machine off using the control panel.
- Unplug the washing machine.
- Wait three minutes.
- Plug the washer back in, and wait thirty seconds before turning the washer on.
How do I fix the F error on my Whirlpool washer?
An F/dL error code indicates a problem with the door lock. The error code will pop up when the door fails to lock. The washer will display the error code after six attempts to lock the door. To fix the issue, the door lock assembly needs to be inspected for loose or broken wires and other signs of damage.
What does code F2 mean on Whirlpool washer?
a long drain time
The F02 error code on a Whirlpool washer indicates that the control detects a long drain time. This can be caused by excessive suds in the tub, a restriction or clog in the drain system, or by a number of other component failures.
Does the Whirlpool microwave have a reset button?
Press the “Off/Clear’ button to cancel anything on the display, and reset the microwave. This is a soft reset and will simply get you out of any program you have started. Press it when the cooking complete reminder appears on the display, for example, and the “Your Food is Ready” message will disappear.
What are the fault codes for Whirlpool appliances?
Whirlpool Fault Codes F1 – E2 UL A/D error (s) F1 – E4 Model ID error F1 – E5 Calibration shifted F1 – E6 Latch signal mismatch error
What are the most common trouble codes that fail emission tests?
Failed Emission Test Codes: Most Common Trouble Codes Problem Description Percentage Evaporative Emission System 24.3% Engine Misfire 17.3% Fuel Trim (lean) 17.2% Catalytic converter 16.4%
Can a whirlpool duet sport washer recall a fault code?
It may well happen that by the time you decide to consult our list of Whirlpool Duet Sport washer error codes, the fault code has already disappeared from the display. That is not a problem, as these washers can recall the most recent error codes. The memory clears only after 10 successful cycles in a row.
How do I clear the error code on my Whirlpool washer?
System error code. Touch POWER to clear the code and exit cycle. Then touch POWER, select cycle, and then touch and hold START/PAUSE to start washer. If code appears again, call for service. Washer taking too long to fill.