What Dana 44 will fit a YJ?
Mopar’s JK Rubicon Dana 44s Fit Under YJ Wranglers Too For a total of approximately $3,000, both front and rear Rubicon Dana 44s that come complete with disc brakes, electric lockers, and 4.10 gears will be delivered to your home or dealer ready for installation.
Will JK axles fit YJ?
The axles and transfer case are the only good parts on the JK’s but the axles don’t fit the YJ very well unfortunately.
Are all Dana 44s the same?
Not all 44s are equal. The Dana 44 has been manufactured for nearly 70 years, and was original equipment under Jeep, Ford, GM, Dodge, International Harvester and Studebaker vehicles, and even the Isuzu Rodeo and Honda Passport. And almost every one of these had some unique, funky specification just for that model.
What axles are in a Jeep YJ?
What Axles Do I Have in My Jeep? Identifying the axles in YJs is pretty simple since there were no options for it. Every YJ came with a Dana 30 up front and a Dana 35 in the rear. TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model.
What is a Dana 489?
Dana 489 Rear Bolt In TJ Jeep Wrangler Axle Assembly. Semi-Float with Dual Bolt Pattern: 5×4.5 and 5×5.5. Base Axle Includes: New Dana 44 Casting Bracketed with TJ Heavy Duty Brackets (100% USA Made) Semi-Float Set 10 Housing Ends (USA Made) (Roller Tapered Bearings) Welded on to Accept Stock TJ Disc or Drum Brakes.
How wide is a Jeep YJ axle?
These Dana 44s are an almost perfect swap for the rear of any TJ, YJ, XJ, ZJ, WJ, or even a KJ. At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface). They are commonly found with Trac-Lok limited slips and either 4.30 or 4.56 gears.
Do all rubicons have Dana 44?
All Rubicon JL owners have a Dana 44 front and rear axle. However, these aren’t your father’s Dana 30, 35, 44 axles though as Dana has made these stronger and lighter than any other generation. So much so that these are not interchangeable with earlier generation axles.
Which is stronger Ford 8.8 or Dana 44?
Registered. The 8.8 is arguably stronger but has a larger pumpkin and needs a lot more fabrication to work. If you are planning on 35″ tires or less, a D44 will do just fine and have more clearance.
Is the M220 a Dana 44?
Jeep JL Rear M220 – Dana 44™ AdvanTEK® Axle.
What’s the difference between a Dana 30 and Dana 44?
The only difference between the JK Dana 30 and Dana 44 is ring gear size, electronic locker, and bigger shafts. (even if she insists shaft size doesn’t matter…) You’re better off just starting with an aftermarket Dana 44 that is a “true 44”.