Do boat trailers need special tail lights?
For trailers eighty inches or less, you generally need tail lights, stop lights, turn signals, side marker lights and reflectors (both side and rear). Boat trailers above eighty inches require more illumination to help define their shape at night.
Can you mix LED and incandescent lights on a boat trailer?
LED bulbs that are designed to fit into traditional incandescent bulb fixtures are available. However, it’s not recommended to mix LEDs and incandescent lights on a boat trailer. Incandescent lights draw much more amperage than LEDs do, and if they pull that current through the LED fixtures, the LEDs can burn up.
What lights do I need on my boat trailer?
Trailers less than 80″ wide are required to have tail lights, stop lights, turn signals, side marker lights and side and rear reflectors on each side. You must also have a license plate light and, on trailers over certain lengths, additional side marker lights and side reflectors are necessary.
What is a good brand of trailer lights?
Partsam is a well-trusted brand with previous experience building lighting systems for big rigs, cars, and trucks. This kit is also the top-rated pick on Amazon. Aside from the accolades, the lights themselves are built to last with LED bulbs and IP68 waterproofing.
What lights do boat trailers need?
It’s common for new boat trailers to feature waterproof LED indicators, brake and reversing lights in addition to sidelights. On top of the reliability and lower power usage of LED lighting, modern LED lights are often fully submersible.
Do boat trailer lights need to be waterproof?
As a boat owner, your boat trailer lights need to be waterproof and submersible, as you will be backing your trailer into the water whenever you put your boat into the water or take it out. As with any marine products, a set of trailer lights need to be resistant to corrosion.
Do boat trailer wires need to be waterproof?
Whether or not it is water proof depends on the trailer, the construction, how it is wired, and if the taillight housings are waterproof. You can use shrink tubing, a good amount of electrical tape, or Liquid Electrical Tape, # SWC50122, to help keep out moisture where wires are connected or exposed.
Do I need brake lights on my trailer?
As soon as you hit the road, all trailers must have reflex reflectors, taillights, brake lights and turn signals. All these lights need to be red, except for the turn signals for the rear, which can be yellow or red.
What lights must a trailer have?
All trailers must have two red side lights, two red stop lights, two red triangular reflectors, an illuminated number plate along with amber indicators designed to flash between 60-120 times per minute.
What lights should be on a trailer?
All trailers must have tail lights, turn signals, reflectors and stop lights. If your trailer is wider than 80 inches or longer than 30 feet, it will need additional reflectors and lights.