How to access Belkin Router?
Accessing the router’s web-based setup page
- Launch a web browser.
- Enter “https://router” or the router’s default IP address, 192.168.
- You will be asked to log in using the router’s admin password. If you have not set a custom password, just leave the Password field blank then click Submit.
How do I reset my Belkin n750 router?
Press and hold the “Reset” button for at least 5 seconds, and then release it. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the restore is complete.
How do I reset my Belkin router from my computer?
To reset the router using the web interface, you will need a computer or tablet connected to the Belkin device.
- Open any browser you like (Chrome, Firefox, etc)
- Log in to your Belkin router.
- In the Utilities section, go to Restore Factory Defaults.
- Clicking Restore defaults will factory reset the device.
How do I find my Belkin router IP address?
General Belkin Router Configuration
- Visit the router’s IP address (http://192.168.2.1) in a new browser window. http://192.168.2.1 is the default Belkin router IP address.
- Click on DNS under Internet WAN.
- Enter the router’s password and click Submit.
How do I fix my Belkin router?
Unplug the modem, the router and the computer (in that order) from their respective power outlets then wait for 30 seconds before plugging them back. Re-plug the modem first followed by the router and then the computers.
What is the default password for a Belkin router?
By default, all Belkin routers’ default username and password is admin (username) while “blank” (leave it blank) for the password. You need to properly connect the router to your modem and PC before you can access the router using a web browser (IE, Firefox, Chrome, etc.).