How do I factory reset a Cisco AP?
Reset Cisco Wireless AP to factory defaults
- Connect the console cable.
- Unplug the power or network cable if connected to a POE switch.
- Press and hold the Mode button.
- Plug the power back into the AP.
- Wait until the output on the console says button is pressed.
What is difference between autonomous AP and lightweight AP?
The main difference is autonomous do not require a controller to control the AP and it use WLSE for management software; the LWAPP require a WLC wireless controller to control all of the AP but provide ease of management for the communication / setting between APs, it use another management software call WCS.
How do I reset my Cisco wireless access point?
What should I look for when using Cisco 2702 series access points?
Keep these guidelines in mind when you use 2702 series lightweight access points: The access point can only communicate with Cisco wireless LAN controllers. The access point does not support Wireless Domain Services (WDS) and cannot communicate with WDS devices.
How many antennas does a 2702i have?
Internal Antennas The 2702I model access point is configured with four dual-band inverted-F antennas, and two 2.4-GHz/5-GHz dual-band radios. There are four antennas deployed inside the access point with one deployed on each corner of the 2702I access point top housing.
What kind of Wi-Fi does Cisco 2700 have?
Document ID:1454553630802137. The Cisco ® Aironet ® 2700 Series of Wi-Fi access points (APs) delivers industry-leading 802.11ac performance at a price point ideal for plugging capacity and coverage gaps in dense indoor environments.
How do I mount a Cisco Aironet 2702 access point?
(Port Address Translation is not supported.) Cisco Aironet 2702 series access points can be mounted in several configurations, including on a suspended ceiling, on a hard ceiling or wall, on an electrical or network box, and above a suspended ceiling. Click this URL to browse to complete access point mounting instructions: