How do I reset my Rainbird SST?
How can I clear all the programming and reset my Rain Bird ESP-Me sprinkler timer back to the factory default settings?
- Turn the dial to Seasonal Adjust.
- Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen.
- Turn the dial back to AUTO RUN.
Why is my Rain Bird not working?
A quick way to solve this problem is to step down lightly on the stem while the sprinkler is in operation. This causes water to flush quickly between the stem and cap, taking the debris with it. If this doesn’t work, the cap is probably damaged and needs to be replaced.
Why is my Rainbird sprinkler system not turning on?
Make sure that the controller is plugged in, has a good battery and is getting power. You can also check the circuit breaker and reset it if needed. If there is power, try resetting the system. Another possible cause is that there was an electrical surge that affected the unit.
How do I reset my Orbit sprinkler timer?
Orbit Sprinkler Timer Instructions
- Push the “Reset” button (located in the bottom-right corner) to clear all previously programmed data if you’re programming the Orbit sprinkler timer for the first time.
- Twist the dial to “Time/Date” to set the date.
What is a common wire in a sprinkler system?
Cut Common Wire The common wire is usually white in color and runs from your controller to your master cylinder and then to each of the other valves on your irrigation system in turn. If something happens to cut your common wire, then every valve after the cut will fail to turn on when activated.
How do you troubleshoot a Rain Bird sprinkler system?
Troubleshoot Rain Bird Valves After checking for issues with the controller and water supply, check that the valves are working. See if they work manually. If they do, select “manual start” from your controller and see if the solenoid clicks when activated. If it doesn’t, it may be burned out and will need replacement.
How do you troubleshoot a Rainbird sprinkler system?
Why won’t my automatic sprinklers turn on?
When the sprinkler zones do not turn on at all, it is generally a problem with the electrical signals running from the controller to the valve solenoids. More rarely, it is caused by a faulty valve that needs to be rebuilt or replaced.
Why is my orbit sprinkler not turning on?
Test the outlet that the Orbit is plugged into if the device will not turn on. If the outlet still works, check the power cable to make sure it is not frayed or worn through. Check the connection to the docking port to ensure the timer is plugged in properly.