Are more axle splines better?
Higher spline counts gives the axle more surface to transfer the load of the torque from the differential. There is also the side advantage that an axle with more splines will also be physically bigger. At least in most modern axles that use similarly sized spline teeth.
How do I choose an axle spline?
To find out how many splines the axle you want to replace has, just count the individual ridges on the end of the axle, it’s that easy! There are some significant advantages in going to an aftermarket axle, the first being how much power they can handle.
What is the diameter of a 31 spline axle?
5.94 in
31-spline axle has a 3.150″ O.D….Allstar Ford 9in Axle 31 Spline 29-1/2in ALL67500.
| Alternate Description | FORD 9IN AXLE 31 SPLINE 29-1/2IN |
|---|---|
| Outside Diameter | 5.94 in |
| Spline Length | 10 in |
| Gun Drilled | Yes |
| Axle Style | Flange |
How many spline is a Dana 35?
Your stock Dana 35 has 27 spline carbon steel axle shafts, you could upgrade it to 30 spline hardened chromoly steel shafts and install a locker with a “Super 35” kit.
How many spline is a Dana 44?
Starting in 1972, modern factory Dana 44s had 30-spine axleshafts with a thickness of 1.31 inches (earlier axles were 10- or 19-spline), although the rear next-generation Dana 44 found on the 2007-present Jeep Wrangler JK has 32-spline shafts.
How do I choose the right axle?
Clearly, there are criteria that should be factored into the selection process of an axle, including the weight and type of vehicle in which it’s to be installed, the weight of the axle itself, the type of suspension being used, the location of the transfer case, what size tire will be fitted and what type of work the …
What is diameter of 35 spline axle?
1,500 inches
For examle, a 35-spline axle has a major diameter of 1,500 inches; a 40-spline axle is 1.708 inches in diameter. Another key aspect of the spline is its shape.
How much stronger are chromoly axles?
1541H can be 50 percent stronger than OE 1040 and about 12 percent stouter than 1050. 4140: 41xx designates the chromoly group. Chromium offers three benefits: improved hardness, better elasticity during quenching, and greater corrosion resistance. Molybdenum and nickel further increase hardness.
How much hp do you put on 31 spline axles?
With sticky track tires and 600hp, the 31 spline stuff will be living on borrowed time. Here is what happened to my 31 spline aftermarket replacement axles when applying about 480hp to them at the strip with slicks and a 4 speed:
How strong are conventional axle splines?
Conventional automotive axle splines are, generally, of the same contour and proportions regardless of size. This strongly suggests that axle strength, as resistance to twisting or shearing, is proportionate to the cube of the spline count as well as to the cube of the spline’s root diameter.
What size case for 35 spline axles?
A solid pinion bearing spacer instead of a crush sleeve is also recommended at higher power levels. Good Luck! The most common is 2.89″, and then the larger 3.062″. I believe Dennis stuffed some 35 spline axles in a 3.062″ case, but the aftermarket case with the 3.25″ bores is the way to go.
How many splines are in a Currie axle shaft?
Features custom length cut and splined, induction heat-treated, 1541 forged alloy 31-spline axle shafts with bearings and retainers loose or installed. Axles are available for late large bearing applications. Currie 31-spline Performance Axles for Ford 9-inch rearends.