How do I find my injector code?
The code is usually located on the injector head. DENSO Common Rail injectors – generally all require coding, although some very early versions may not. A typical code length is 16-24 alphanumeric characters depending on the vehicle make. The code is usually found on the injector connector.
Where is the part number on an injector?
The majority of diesel injectors are made by Bosch and the part number is usually found on the pin connector unit above the O ring , however on some injectors they will be on the main body. Petrol injectors tend to have part numbers stamped on the side of them.
What do numbers on injectors mean?
Fuel Injectors are sized by their flow rate. Flow rate is a measurement of how much fuel can be delivered over time. It is listed in pounds per hour (lbs./hr.) or cubic centimeters per minute (cc/min.). The right size injector can supply enough fuel under full load conditions at an 80% duty cycle.
How much does it cost to code fuel injectors?
The labor can cost between $200 and $300, while the cost of the parts will vary from $150 to $600. Knowing how much it costs to replace fuel injectors when they need to be replaced, and the signs of bad injectors can help you prevent larger issues.
Do injectors have to be coded?
Coding an injector is a vital part of the testing and repairing of injectors, and provides an essential connection between the physical injector firing events and the digital Electronic Control Unit (ECU) of the vehicle’s engine.
Do fuel injectors have serial numbers?
The unique, 4-7 digit serial number can be found at the base of the connector, on the body of the injector.
What do the numbers on injectors mean?
How do you code diesel injectors?
How to code diesel injectors
- Injector coding.
- Diagnostic equipment.
- Step 1: Scroll down to the ‘Fastcheck EMS’ function and press ‘Select’
- Step 2: Select ‘Prog.Inject.Codes’
- Step 3: Follow on screen prompts to select the vehicle.
Do you have to code diesel injectors?
What is the difference between high and low impedance injectors?
There are two main types of injectors: low impedance and high impedance. A low impedance injector will have a resistance of around 2.5 to 3 ohms, while a high impedance injector will fall somewhere around 12 ohms. Resistance can be measured with a multimeter across the injector’s electric terminals.
What are the codes on the Detroit Diesel Series 60 engine?
Detroit Diesel Series 60 Engines only Please note: Codes 43, 44, and 45 are critical codes and if they are shown, the Stop Engine Light will come on which causes the engine protections to engage and your engine may shut down.
How to set new calibrations for the injectors of a Detroit engine?
To set new calibrations for the injectors (for example, after new injectors have been fitted): 1). Connect DETROIT Engine (60 Series) using Detroit Diesel Diagnostic Link (DDDL v6.50). Read More: How to Connecting DETROIT Engines using Detroit Diesel Diagnostic Link (DDDL).
What does the injector calibration code mean?
The injector calibration codes tells the ECM how to modify the metering. With Detroits, the bigger the number does not mean you have “better” or “stronger” injectors. Detroit Diesel purposely randomized the numbers to keep the cowboys out of it!
What does code 43 mean on a Detroit Diesel engine?
These codes are for your reference only. Detroit Diesel Series 60 Engines only Please note: Codes 43, 44, and 45 are critical codes and if they are shown, the Stop Engine Light will come on which causes the engine protections to engage and your engine may shut down.