How do I connect my Panasonic projector to WIFI?
- 1) Turn the display ON.
- 2) Configure the display’s local wireless network settings. Display the on-screen menu.
- 3) Switch the input of your display to [Panasonic APPLICATION] – [NETWORK].
- 4) Join the local wireless network from your Android device.
- 5) Launch the application, then search for display.
How do I reset my Panasonic projector?
- This usually works:
- Press the {MENU} button.
- Go to “Options” menu.
- Select “OSD”.
- Then press and hold the {ENTER} button, until the Service Menu is displayed.
- Press the {MENU} button to exit.
How do you unlock a projector button?
If the projector’s control panel buttons have been locked, hold the Enter or lock button on the projector’s control panel for seven seconds to unlock them. You can also use the remote control to set the Control Panel Lock setting to Off in the Settings menu.
How do you use a Panasonic projector?
- Connect your projector’s VGA cable to the 15-pin VGA output on its back or side panel.
- Connect the other end of the projector’s VGA cable to the VGA input on your Dell Latitude notebook.
- Turn the projector on by pressing its “Power” button.
- Press your Latitude’s “Power” button to turn it on and wait for it to boot up.
How do I connect my Panasonic projector to my phone?
■ Connect the projector to your iOS/Android device by reading a QR Code displayed on the projector with the device’s camera. When connecting the projector and device by reading a QR Code, you need to connect the optional wireless module to your projector’s terminal.
How do I connect my phone to projector?
USB-C to HDMI Cable Newer Android devices, like the latest Samsung phones, use USB-C to charge. If you have a USB-C device, you can use a USB-C to HDMI cable to connect your device directly to an HDMI-capable projector. You shouldn’t have to do anything other than connect your USB-C device to your projector.
Where is the Menu button on Panasonic remote?
Set the time, date, sleep timer, brightness and contrast if this is your first time using your television or remote by pressing the menu button labeled “Menu” near the top-left of the remote.
What is projector password?
You must enter the correct password to use the projector. Press and hold down the Num button on the remote control while you enter the password using the numeric buttons. Note: The default password is 0000.
How do you lock a projector?
Locking the Projector’s Lens Settings and Buttons
- Press the Menu button.
- Select the Settings menu and press Enter.
- Select the Lock Setting setting and press Enter.
- Select one of these lock types and press Enter:
- Select Yes and press Enter.
- Restart the projector for the lock settings to take effect.
How do I connect my computer to my Panasonic projector?
What to Know. Plug an HDMI cable into your laptop and the projector (using an adapter if necessary), then turn on the projector and open the lens. Open the display settings on your laptop and adjust as necessary. Use mirror display to project your desktop, or extend display for the projector to act as a second monitor.
Why is my projector not connecting to my laptop?
Most problems with standard projectors are usually the result of a poor cable connection with the host computer, so if you cannot view your computer display on a projector, the first thing you should check is the cable connecting the two devices. Ensure that the cable connection is secure on both ends.
How do I connect my iPhone to my Panasonic projector?
On your iOS device, tap [Settings] – [Wi-Fi]. Turn [Wi-Fi] ON. Available networks are shown. Select the SSID of the projector you want to connect to….
- Turn the display ON.
- Configure the display’s local wireless network settings.
- Switch the input of display to [Panasonic APPLICATION] [NETWORK].
How do I reset my overhead projector?
Press the menu button on the projector or the remote control and then navigate to the Advanced Settings. 2. Select to restore factory default settings.
How do I connect my Panasonic projector to my WiFi network?
2 Click [Start]→[Connect To_]→[Wireless Network Connection_], select the wireless network of [SSID] set with the projector, and then click [Connect_]. If the projector setting is the factory setting, then [SSID] is [Panasonic Projector].
How do I restrict the network connection of my projector?
NETWORK PASSWORD Use this if you want to restrict the connection by setting the password when connecting with the projector using the “Wireless Manager mobile edition 5.5”. Set to [ON] if you want to perform the password check when connecting to the network. (Default : [OFF]) 1 Select [NETWORK PASSWORD] at the network menu. NETWORK
How do I change the wireless LAN settings on my projector?
2) Display the on-screen menu of the projector, select [NETWORK] → [NETWORK SETUP], and enter settings. Set [DHCP] to OFF, and enter appropriate settings in [IP ADDRESS], [SUBNET MASK] and [DEFAULT GATEWAY] according to the wireless LAN access point to be connected to.
How do I login to my projector?
f The web connection screen ([Network Display System] screen) of the projector is displayed. 3 Click [Login ] and enter the password in the [Password] column. f The factory default setting of the user name is “admin” (fixed) and the password is “admin”. 4 Click [Login ]. f The [System Status] page is displayed.