Can I replace an axial cam pump with triplex pump?
Axial Cam pumps use direct-drive mechanics and spin at the same speed as the engine, which wears down faster than a triplex pump but can still be replaced (unlike the wobble pumps found on entry-level models.) Triplex plunger pumps are more expensive but offer longer life and better performance.
How long does axial pump last?
Their life span is somewhat comparable to axial cam pumps at around 200 – 400 hours (~3 hours/week for 2-3 years). Used in: Some pressure washers below 2500 PSI and low flow rate (less than 2 GPM).
Do electric pressure washers last?
In general, most well know pressure washer companies guaranty their machine for at least 500 hours. Most persons use it for around 50 hours each year. That means that a well-maintained pressure washer should last at least 10 years.
Do electric pressure washers last long?
When it comes to durability, gas pressure washers trump electric pressure washers. Gas-powered units can last for ten years, easy. Electric pressure washers, on the other hand, tend to only last 3 to 5 years, depending on the maintenance.
How do you choose an axial flow pump?
When selecting an axial flow pump, there are a few key performance specifications to consider: Flow rate describes the rate at which the pump can move fluid through the system, typically expressed in gallons per minute (gpm).
Why choose an axial cam pressure washer?
With a maintenance-free design requiring no oil changes, it is easy to see why the axial cam is the pump of choice in residential pressure washers. SIMPSON® offers axial cam pumps in both vertical and horizontal mount configurations.
What is an axial cam cleaning pump?
Axial-cam pumps are used in the commercial cleaning industry but are mostly used as residential grade pumps. These pumps are not considered as robust but they are lower cost by design. Many axial pumps are sealed and labelled as “no-maintenance” pumps. This just means you run them until they stop working and then you replace the pump.
What kind of pump does a AAA pressure washer use?
AAA Pumps is a pump made by FNA Group for use in their pressure washer. They own the brand Simpson Cleaning. Used by these brand pressure washers: Simpson. Pump types made by AAA: Axial Cam, Triplex. There are many good places to buy a replacement pump.
What is the PSI of OEM technologies™ axial cam pump kit 90025?
OEM Technologies™ Axial Cam Pump Kit 90025 Part No: 90025 2400 PSI at 2.0 GPM Axial Cam Pump Kit Add to compare Only 3 products can be selected OEM Technologies™ Axial Cam Pump Kit 90026