Why does my garmin scale have a wrench?
The wrench icon on the Index Smart Scale indicates that the scale is in setup mode.
What does the spanner light mean on a Ford Focus?
powertrain malfunction indicator light
The wrench warning light on Ford vehicles is the powertrain malfunction indicator light. When it illuminates, it means that the computer has detected an issue with your vehicle’s powertrain or four-wheel-drive system.
What does the wrench light mean on a Mitsubishi Mirage?
ago. Additional comment actions. “Most Mitsubishi vehicles are equipped with an electronic computer system that is linked to the dashboard. This system triggers a wrench-shaped dashboard symbol, which tells drivers when routine maintenance or an inspection is required”
How do you reset a Garmin scale?
NOTE: Resetting the device deletes all of the users and data from the device, but does not delete information saved to your Garmin Connect™ account.
- Tap the scale.
- On the underside of the scale, press RESET. The scale turns off.
- Hold RESET until. flashes and turns red.
- Set up the scale (Setting Up Your Device).
How do I reset index scale?
To perform a factory reset on the Index Smart Scale series, locate the RESET button on the underside of the scale, hold RESET for 5 seconds. When the factory reset is successful, the display will completely light up and then two circular arrows along with the WiFi icon will briefly appear for a few seconds.
What does the wrench mean on the dashboard?
What does the wrench light mean? Both of these symbols indicate that your car needs service. Usually, it’s because of some sort of time-based milestone not being met, or there’s a fault with the car that needs professional attention.
How do I get rid of the wrench icon on my Android?
You need to ‘pull down’ the top bar by swiping down with your finger. You’ll see the wrench next to your google account info. Tap on it and it takes you to the updated info for your google account. Then it goes away.
What does a wrench by the miles mean?
15,295. bobkat answered 7 years ago. That would be for an “A” service which is generally an oil change and filter. Depending on the mileage, it usually also recommends air and cabin filter change or inspection.
Why is my Garmin scale not working?
If you step onto the Index Smart Scale and the device does not automatically wake up, step off the scale and tap the scale with your foot. Once the scale wakes up, step on the scale once more to upload the body measurements to Garmin Connect. If issues persist you may need to change the batteries in your scale.
How do I reconnect my Garmin scale?
Changing Your Wi‑Fi Connection
- Tap the scale.
- On the underside of the scale, press RESET.
- Wait a few seconds.
- From your Garmin Connect™ device menu, select General > Wi-Fi Networks.
- Follow the on-screen instructions.
How do I reset my smart scale?
Index Smart Scale
- Press and release the reset button on the back of the scale. The wrench icon will appear on the screen.
- Press the reset button for 5 seconds to factory reset the scale.
How do I reset my Garmin index scale?
What does a wrench icon mean?
What is the wrench icon?
The ‘Wrench’ icon is used to denote the settings menu and has been present in every release of Chrome since 2008. If you’re on the bleeding edge of Chrome development (i.e. the dev channels) then you’ll already know this; the new icon has been in place for a few weeks.
How do I reset the service Spanner symbol on the dashboard?
The “service” spanner symbol “reset” button is placed on the lower right corner of the dashboard. See picture below: Then you should reset the “service” spanner symbol by pressing on the “reset” button on dashboard, when ignition key is in OFF position.
What do the icons on the dashboard mean?
The following icons are a big deal – bring your vehicle in for service now! Electronic Power Control (EPC) – Exhaust Gas: The yellow EPC dashboard symbol means engine malfunction—bring your vehicle in to your local authorized VW dealer for service.
What does the green light on the dashboard mean?
Shift Lock: This green light means the brake must be applied to shift vehicle into gear. Just step on the brake pedal to be able to shift your car gears (Drive, park, neutral, etc.). Hood Open: The red Hood Open VW dashboard indicator light means your engine hood is open or not closed properly.
What do these icons only appear on diesel vehicles?
These icons only appear on diesel vehicles… AdBlue® Level Warning: The AdBlue warning light means the diesel exhaust fluid is low. Although it may not be a direct safety threat, it means you might have difficulty turning on the engine and, eventually, it will prevent your car from starting.