How do I program my new AstroStart remote?
Astrostart Alarm Key Fob Remote Programming Instructions
- Open you hood. If needed, jump the red/black wire to a good ground.
- Turn the key on, press and release the brakes.
- Turn key from on to off 3 times.
- Push any button the first remote to be programmed.
- Turn key on and press brakes once.
Does Astro start have an app?
2) Get AstroStart SmartStart installed in your car To make full use of the powerful AstroStart SmartStart App, you need to have the AstroStart SmartStart hardware and a compatible AstroStart system installed in your car.
What is the difference between 1 way and 2 way remote starters?
When you press a button the remote starter will execute the command and the vehicle will respond with parking light flashes. A 2-way system does the same but it also sends a signal back to the remote to notify you that the command has been executed.
How do I get my remote starter to work?
Hit the lock button once, then hold the remote start button (Usually shaped like an arrow ) for at least 2 seconds or until the turn signal lamps flash. Keep holding and the vehicle should start.
What should I look for when buying a remote car starter?
These are the 4 factors to keep in mind:
- Quality. You need to consider quality before the prices when you are looking for a reliable remote starter system.
- Range.
- Engine Speed Sensing.
- Warranty.
Will a remote starter drain car battery?
Compustar and Arctic Start systems are made of high quality components that reduce the occurrence of parasitic current draw. However, it is still possible for a remote car starter to consume too much power from your battery.
Can I turn my car off with remote start?
After starting your truck with remote start, you can turn it off using remote start also. You just need to use the key fob. To turn the engine off after using remote start. Press the 2X button two times.