How many zones on XR150?
142 zones
The XR150 provides up to 142 zones, programmable for burglary, fire and access applications.
How many wireless zones does a DMP XR150 have?
100 wireless zones
The 1100X Series Wireless Receiver provides up to 100 wireless zones for XR150 Series panels and up to 500 wireless zones for XR550 Series panels. The 1100XE features 128-bit AES encryption.
How do you program a DMP panel?
HOW DO I GET INTO PROGRAMMING? Reset the control panel by shorting the J16 panel reset jumper for two seconds, then enter 6653 (PROG). If you are working with an XR100, XR200, or XR500, hit the CMD button. The keypad will now show PROGRAMMER.
How do I set a default DMP panel?
Reset the control panel by shorting the RESET header or pressing the RESET button on the panel. Then, at a keypad, press 8-1-4-4 (W-A-L-K) (then press CMD on XR panels).
How do I change the address on my DMP keypad?
Set the keypad address from 01 to 08 with the XT30, XT50, XR100, and XR150. Set the keypad address from 01 to 16 with the XR500, XR350, and XR550. The factory default address is set at 01. To change the current address, press any Select key and enter the new address.
How do I reset my DMP smoke detector?
Press any top row key. The sensor turns off then turns on. The keypad and system are reset. Press the RESET key and enter the programmed user code followed by the COMMAND key to reset the panel.
How do you clear a DMP alarm?
Press Chime to turn the chime feature on and off. If chime is on, the keypad will sound an alert and display a notification when external doors and windows (with sensors installed) are opened. Press Reset to reset fire and panic sensors after they have triggered an alarm.
How do you reset an alarm sensor?
You can reset your alarm system by powering it down and then powering it back on. This is what is known as a power reset. To power down the system, the backup battery must be disconnected, and the transformer must be unplugged. Then reconnect the battery and transformer to power it back on.
How do you silence a DMP alarm?
While the alarm bell or siren is sounding, enter your user code. The keypad displays DISARM SILENCE. 2. Press the Select key under SILENCE to stop the bell or siren.