How do I update my Aptio Setup utility BIOS?
F7 update Starts the BIOS update by pressing the F7 key during the boot process (before the operating system loads). Power button menu update Starts the BIOS update from the Power Button Menu (by pressing the Power Button for three seconds). UEFI Shell update Starts the BIOS update from the EFI Shell.
Why is my laptop stuck on Aptio setup utility?
Try just restarting the computer. Sometimes it is all you need. B. Change the BIOS (aka Aptio Setup Utility) to its default settings and then restart the computer.
How do I enable advanced settings in BIOS?
Boot up your computer and then press the F8, F9, F10 or Del key to get in to BIOS. Then quickly press the A key to show the Advanced settings. In the BIOS, press Fn+Tab for 3 times.
How do I fix BIOS setup utility screen?
To do so, follow these steps:
- Restart your computer.
- Notice the key that you need to press at the first screen. This key opens the BIOS menu or “setup” utility.
- Find the option to reset the BIOS settings. This option is usually called any of the following:
- Save these changes.
- Exit BIOS.
How do I factory reset an Aptio setup?
Replies (5)
- Restart your PC.
- The Aptio Setup Utility main menu should appear.
- Enter Settings and look for the ”Reset Configuration Data” or ”Factory reset” options.
- Reset BIOS to factory data and save changes.
- Exit Aptio and reboot your PC.
How do I enable advanced BIOS?
How do you unlock American Megatrends BIOS?
How to Unlock American Megatrends BIOS Settings
- Switch on the computer.
- The moment the computer is turned on, Press the “Del”, “F1” or “Esc” keys to open the AMI BIOS.
- Now, press the “Alt” and “F1” keys to unlock the hidden settings on the AMIBIOS.
How do I enable launch CSM in Aptio setup utility?
Go to Bios, go to Security, expand the Secure Boot Control menu and make sure the secure boot option is disabled. Save and exit the tab, restart the PC and wait for it to load the Aptio Setup utility settings again.
How to boot from USB On Aptio setup utility?
Configure Computer to Boot from USB on Aptio Setup Utility Step 1. Connect a USB bootable Drive or USB recovery drive to the PC. Step 2. Restart PC and press F2/F9/F12 or Del while booting up PC. Step 3. Wait for the computer to enter Apito Boot Menu. Step 4. Disable Secure Boot Control and enable Load Legacy OPROM.
How do I change the BIOS boot order in Aptio?
Then use the Up or Down arrow key to select items that you want to configure. It’s the most frequently used option for configuring computer boot order or switching BIOS boot mode in Aptio Setup Utility. The Boot menu contains UEFI/BIOS Boot Mode, Retry Boot List, Network Boot Retry, OSA Configuration, Boo Priority, etc.
How to fix Aptio not detecting boot disk?
Disable Secure Boot, Allow Aptio to Detect Boot Disk Reboot PC and press F2/F9/Del to enter Aptio Boot Menu. Go to Security, expand “Secure Boot Menu”, disable it. Save the changes and exit Aptio, then restart the computer. If the problem continues, re-enter Aptio, go to Boot, and disable “Secure Boot and Fast Boot”.
How to enable PXE and optical drive in Aptio?
You may need to enable the Launch CSM (Compatibility Support Module). If it is set to disabled, it probably restricts the boot options to UEFI only, as in a Windows 8 secure boot. Once done (if you have that option), on the next reboot into Aptio, all boot options will (hopefully) appear, including the optical drive and PXE.