What does it mean when theft system light comes on?
The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.
What triggers anti-theft system?
The Anti-theft alarm system works with the help of sensors installed in and around the vehicle. An impact or the movements inside the car activates the sensors. It, in turn, triggers the alarm system and sounds the alarm. Finally, the alarm goes off and alerts the owner/people.
How do you reset the anti-theft system on a 2009 Chevy Malibu?
Turn the key counterclockwise. Turn the key clockwise to lock the door. Turn the key counterclockwise to unlock the door again. This will shut the alarm off and reset the system.
How do you reset the anti-theft on a 2012 Chevy Malibu?
Put the key in the ignition, turn to the “run” position (don’t even try to crank it). Leave it on for about 15 minutes. Turn they key off and remove it from the tumbler. Repeat this procedure three times, the last time untill the THEFT light goes out.
Why is my security light staying on in my car?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
Why won’t my security light go off?
If your outdoor security light won’t turn off, it’s most likely because of one of these problems: The sensitivity settings are too high. The duration settings are too high. It’s stuck in auto mode.
Why does my security light stay on?
What Causes my Light to Stay On? Several things can cause your motion detector to stay on, including age, storm damage, a power surge, improper installation, and improper settings.
How long does it take for the anti theft system to reset?
Leave the key there for 15 minutes; it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up. Turn the key backward two places to the Lock position, then wait three more minutes.
How do you turn a security light off?
Most manufacturers make it a fairly easy process to disable this main feature of the lights. A switch on the fixture should read “on time,” usually found directly under the motion sensor. Set it to any position, aside from the test position, and flip off the switch that the light is connected to.
How do I turn my security light off?
The best way to reset a motion sensor light is to turn it off and back on again for a period of 30 seconds or longer. A homeowner can also turn the power to it off at the breaker, in order to ensure it has time to reset itself. If that doesn’t work, the sensor itself or the bulb may be to blame.