Can I add a second tray to my Brother printer?
You cannot attach a 2nd tray only supports a single tray. The standard paper tray that comes with the printer can be adjusted to accept legal size paper.
How do I print from Brother printer to tray?
Click File → Print.
- b. Click Properties or Preferences.
- c. In the Paper Source dropdown, select the paper tray you wish to print from (ex. Tray 2) for First Page and Other Pages.
- d. Click OK.
- e. Click OK or Print to print the document.
How do I fix the paper feed on my Brother printer?
You may damage the cover and cause paper jam.
- Clean the Paper Pick-up Roller (1) with isopropyl alcohol on a cotton swab.
- Put the Jam Clear Cover back on. Make sure the cover is set properly.
- Put the paper tray firmly back in the machine.
- Re-connect the power cord.
How do you change what tray a printer prints from?
To specify a tray within MS Word the user must:
- Click File and then Print.
- In the Print Dialogue click Page Setup.
- In the Page Setup window click on the Paper tab.
- Select the intended tray for the first page and remaining pages.
- Make sure that the same tray is selected in the Driver Properties.
Can you add a second tray to Brother HL L2370DW?
The Brother HL-L2370DW does not have the dual tray capability.
Can you add a tray to Brother DCP L2550DW?
1-1 of 1 Answer. The Brother DCP-L2550DW does not have an extra paper tray available.
What is tray 1 on Brother printer?
If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size and Paper Type settings if needed, following the LCD instructions.
Why does my Brother printer keep saying no paper fed?
Check the following points to clear the No Paper or No Paper Fed message. Cause 2: The paper was not inserted in the center position of the manual feed slot or MP tray. Cause 3: The Jam Clear Cover is not closed correctly. Cause 4: Paper dust has accumulated on the surface of the paper pick-up rollers.
How do I select a paper tray to print?
NOTE: The steps may differ depending on your application.
- From within your application, click File => Print.
- Click Properties.
- Click on the Basic tab.
- In the Paper Source dropdown choose the Tray that you want to print from.
- Click Apply => OK.
- Click OK or PRINT, depending on your application.
How do I print from second tray?
Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2. From the Paper Size drop-down menu, select the appropriate paper size for the print job.
How do I use the bypass tray on my Brother printer?
Pull the paper tray completely out of the machine. Press the blue photo bypass tray release button (1) and slide the whole output paper tray cover forward until it locks into the photo printing position (2). Load up to 20 sheets of Photo or Photo L paper in the photo bypass tray with the printing surface face down.
How do I setup a printer tray 2?
Click the Accessories tab and click Auto Detect. After Tray 2 has been detected, click Apply. – If Auto Detect does not detect the tray, you can manually add it. Under Available Options, select the tray, click Add and then Apply.
How do I reset my Brother printer after paper jam?
Unplug your Brother machine from the AC power outlet (electrical socket). If the paper support flap is open, close it, and then close the paper support. Pull the paper tray (1) completely out of the machine. Pull the two green levers inside the machine to release the jammed paper.
What is tray Switching?
When a tray runs out of paper, tray switching enables the printer to switch between trays when the trays contain the same paper type and size. Tray switching is controlled by the printer driver, front panel, or CentreWare IS.
What is a tray setting?
This feature identifies the paper size defined for each paper tray. • Paper Size. This setting allows you to define which paper size is used for the tray and manual feed slot. Highlight the paper source you want to define and then choose the paper size from the pull-down menu.