Is TES 295 the same as deXRon VI?
DexVI is licensed by GM and is not a TES-295 fluid. Dex VI comes in GM Allisons from the factory. GM takes care of warranty issues on the Allison that comes in our GM pick ups not Allison. DEX VI is not synthetic as it comes from the factory or from GM.
What is the difference between TES 295 and TES 389?
“TES 389 is more of a mineral-base fluid with shorter drain intervals,” says Jordan. “Option two is the synthetic TES 295, which will have much longer oil drain intervals and less maintenance required by the maintenance shop.”
Can you mix TES 295 and TES 668?
Delo SYN ATF 668 can be mixed with these fluids and allows for the same drain intervals as TES 295 and TES 468 fluids. As noted, this fluid can be mixed with TES 295, TES 389 and TES 468 fluids therefore topping off is acceptable.
What is the difference between TES 295 and TES 668?
In testing, Delo Syn ATF 668 was shown to deliver improved transmission performance and clutch operation compared to TES 295 fluids, resulting in smoother shifts at lower speeds and over a wider temperature range. It also helps prevent the accumulation of deposits and the formation of sludge, varnish and foam.
Is dexron VI OK for Allison Transmission?
deXRon®-Vi shall not be used in allison 500, 600 or 700 series transmissions (at, mt, ht, ht/V/Clt products). schedule one tes 389 and deXRon®-Vi fluids will have the same fluid change intervals as the current allison approved non-tes 295 fluid intervals.
What is TES-295?
Performance Plus Full Synthetic Heavy Duty (TES-295® & TES-389®) Transmission Fluid offers: Additives to enhance friction properties. Providing smooth shifting, reducing shudder. Formulated for anti-wear protection. Extending the life of the transmission.
Is deXRon VI OK for Allison transmission?
What is the new Allison approved TES 295 fluid specification?
This new fluid specification will be available in the market beginning in January of 2021. Allison recommends that customers use an Allison Approved TES 295® automatic transmission fluid to extend drain intervals and enhance transmission performance and durability in all operating environments with on-highway products.
On-Highway Fluids. TES 389™ fluids may be used in traditional on-highway products but do not provide the same drain intervals or filter change intervals as Allison Approved TES 295®. To purchase an Allison Approved TES 389™ fluid, use the Sales & Service locator to find an Allison Distributor facility in your area.
What is the difference between TES 468 and TES 668?
Allison Transmission TES 468™ Approved Fluids are approved for use in Allison H 40/50 EP™ on-highway products and may be used anywhere a TES 295® product is specified. Allison recommends that customers using TES 468™ Approved Fluid consider Allison’s newest fluid spec, TES 668™, for their next service.
Which Allison approved fluid should I use?
Allison recommends that customers using TES 468™ Approved Fluid consider Allison’s newest fluid spec, TES 668™, for their next service. To purchase an Allison approved fluid, use the Sales + Service Locator to find an Allison Authorized Distributor in your area.