What do you use a scrub plane for?
A scrub plane is designed to quickly remove large quantities of wood. Based on the Stanley 40 1/2, the open throat and curved blade allow you to take deep cuts with ease. Our Scrub Plane can quickly thickness rough sawn boards or cut stock to width before following with a Jack or Smoothing Plane.
What is the difference between a jack plane and a smoothing plane?
Jack plane is used to shape the lumber to finer dimensions while the Smoothing plane is used to smoothen further out the surface by making it ready to finish.
What angle is a scrub plane?
The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more.
What is a No 5 plane used for?
Bench or ‘Jack’ planes have a long base and are used for the initial preparation of rough timber. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness.
What is the best all round hand plane?
BEST OVERALL: WoodRiver #4 Bench Plane.
What is a Stanley No 4 used for?
Product Description. The Classic STANLEY No. 4 Sweetheart Smoothing Bench Woodworking Planer is made from extra thick, 1/8-inch A2 steel for excellent edge retention, with a one-piece base and frog. The wood planer hand tool has a norris-type adjuster with lateral locking feature, and adjustable throat plate.
What is a block plane best for?
A block plane is a small metal-bodied woodworking hand plane which typically has the blade bedded at a lower angle than other planes, with the bevel up. It is designed to cut end grain and do touchup or finish work. It is typically small enough to be used with one hand.
Are old Stanley Tools worth anything?
Generally, the earliest Stanley tools are more valuable than later models. Most tools that you will commonly find are going to be worth about 50 to 70 percent of the current retail price of the product. There are certain tools that are very old, very rare and very desirable.
When did Stanley stop making planes in USA?
A basic range of block and bench planes survived but their numbers were cut shorter every few years. Stanley UK continued to manufacture some planes but to all intent and purpose the Stanley plane manufacturing business was dead by the late 1980s.
What’s the difference between a jack plane and a scrub plane?
It’s really just a matter of degree. A scrub plane will tend to have a more open mouth, a narrower blade, a shorter and narrower sole, and a camber with a tighter radius compared to a jack plane set up for heavy stock removal.
How long should a scrub plane be?
The scrub plane is typically about 9″ long. The jack/fore plane can be anywhere between 14″ and 20″ long. In the English tradition of woodworking, there was no such thing as a scrub plane. None of the English language books on woodworking before the late 19th century make any such mention of such a plane.
Is a scrub plane a woodworking or carpentry tool?
The theory has been floated that a scrub plane is more of a carpentry tool than a woodworking (as in furniture making) tool. I have an 8″ radius camber on the jack plane that I have, and it’s plenty aggressive for me.
What is the difference between a fore and a scrub?
In today’s standards, the Fore is often said to be the #6 in the Stanley numbering system while the Scrub could be around a 4 or 5. 300 years ago in an English shop the Fore, Try (jointer), and smoother did all the milling work. The Jack was really a joiner or carpenter’s tool but was set for a thick cut.