What size screws for Sanus TV mount?
The SANUS Universal TV Mounting Hardware Pack includes all the hardware you need to virtually mount any TV up to 90”. The complete 88-piece kit lets you select the hardware that is compatible with your TV, including M4, M5, M6, and M8 TV screws and spacers. M4/M5 washers (8 pcs.) M6/M8 washers (8 pcs.)
Where do you put the spacers on a TV mount?
Where should you add spacers on a TV mount? You have to insert spacers on the backside of the TV against the wall when wall mounting your TV. The spacers go on the TV’s side while the washers are added on the wall mount side against the head of the bolt.
Are SANUS TV mounts worth the money?
After all of our research and testing, we selected the Sanus VMPL50A-B1 as the best tilting TV mount. This UL-approved mount is designed for TVs ranging in size from 32 to 85 inches, and it can hold up to 150 pounds, which is more than enough for any TV.
Where does the spacer go on a TV mount?
The spacers go on the TV’s side while the washers are added on the wall mount side against the head of the bolt. Make sure you do not use multiple spacers on a bolt but you can use a washer with a spacer if the bolt has enough length.
How big should pilot holes be for TV mount?
Pilot holes MUST be drilled to a depth of 75 mm (3 in.) using a 10 mm (3/8 in.) diameter drill bit. Never drill into the mortar between blocks.
Do I need spacers for TV mount?
The only need for spacers is to ensure the bracket where the screw is inserted and attaches to the TV doesn’t bend, which it would likely do if the TV back either isn’t flat or has screwholes that are recessed a bit and wouldn’t offer a lip for the bracket to meet when tightening a screw.
Why does my mounted TV look crooked?
Your mount’s hardware is loose. Additionally, you will want to make sure the wall does not have a slant or have some crooked parts to it. Surprisingly, there are many times little items, such as a loose bolt, will cause a TV to be crooked.
How do I level my Sanus TV mount?
Loosen the knobs on the TV brackets [02, 03] to adjust the tilt of your TV. Tighten the knobs when your TV is set to the desired tilt. If needed, tighten a screw on the TV brackets [02, 03] to level the TV.
Should I use spacers when mounting TV?
Do I need spacers for my TV?
Uses of Spacers when You Mount Your TV You should know that spacers are used by professionals for the following reasons: They fill in the extra gaps between your TV and TV mount. Spacers are used when you do not want to cut your long screws. It helps to provide support to your entire installation of TV on the wall.
Do you have to use spacers on TV mount?
Why do you need spacers when mounting a TV?
Uses of Spacers when You Mount Your TV They fill in the extra gaps between your TV and TV mount. Spacers are used when you do not want to cut your long screws. It helps to provide support to your entire installation of TV on the wall. It avoids bending the screws of the TV.
What size drill bit to use for TV mount?
Using the 3/16″ drill bit, drill a 2.5″ hole in each of your top two marks. We’ll be attaching the mount with a pair of hefty, unslotted lag bolts in those spots.