What UPS are compatible with Synology NAS?
UPS
| Brand | Model Number | Tested by |
|---|---|---|
| Show All —— APC CyberPower Delta EATON FT UPS INFOSEC Kehua MGE NEXT Nitram Omron Online-USV PowerShield PowerWalker Powercom Santak | Show All —— Synology Vendor Recommended | |
| APC | BK475I | Vendor Recommended |
| APC | BK500 | Synology |
| APC | BK500-RS | Vendor Recommended |
Do I need a UPS for my Synology NAS?
If you run a web server on your Synology NAS with an online website on it, an UPS is a must-have. It doesn’t matter what you think, you can’t predict when the power goes out.
How do I choose UPS Synology?
Open the Control Panel in Synology DSM, select Hardware & Power, then select UPS. Enable UPS support and determine if you’d like the UPS to enter standby mode when the battery is low, or after a specified period of time.
How does Synology NAS work with UPS?
After the Synology product is successfully connected to the UPS and Safe Mode is enabled, in the event of a power outage, the Synology product will automatically enter Safe Mode when the UPS is low on power or the set time for entering Safe Mode has been reached.
Does a NAS need battery backup?
Yes, you do need a UPS. It protects against over/under voltage, temporary dropouts and surges. It is not meant to keep the NAS up long term. The most important thing is that the UPS can initiate a clean shutdown of the NAS and keep it powered for as long as it takes for the NAS to shut down.
What happens to NAS If power goes out?
The NAS remains functional. The power is not restored, and the NAS is in auto-protection mode. The NAS stops all running services. All shared folders and iSCSI LUNs become inaccessible.
What happens to NAS when power goes out?
The NAS stops all running services. All shared folders and iSCSI LUNs become inaccessible. The power is not restored, and the NAS is powered off.
What happens if Synology NAS loses power?
In situations where the Synology NAS shuts down during Standby Mode, it will automatically turn on when power is restored if you have enabled the Restart automatically after a power failure option (located at Control Panel > Hardware & Power > General).
How much power does a Synology use?
According to Synology’s website, the power consumption of the device is 17.23 W in access mode and 5.4 W in hibernation mode.
Should a NAS have a UPS?
Does a NAS need to be always on?
Your files are stored on the NAS server and can be synchronized, or automatically kept up-to-date, on all of your devices. This service needs to always be online so the NAS should always be on.
Should you power down Synology NAS?
Anyway, there’s no need to turn off the NAS at night from a hard drive lifespan perspective.. The hard drives are pretty much turned off during hard drive hibernation but the DSM system continues running..
How do I protect my NAS from a power outage?
An UPS (Uninterruptible Power Supply) is a backup power device that allows the Synology NAS to continue operating for a short time if power failure occurs.
How much does it cost to run Synology NAS?
Basically, a Synology NAS with two discs consumes approximately 30 W/watts, the energy usage of a modern led light bulb.
How much does it cost to run a NAS?
The NAS, which has two hard drives spinning constantly, was unsurprisingly a higher consumer of electricity, chewing up the equivalent of 8.6 cents per day ($2.40 per month) of electricity. Taken together, the network components cost $5.51 per month, or just over $66 per year, to run.
Should I turn my NAS off at night?
Should I turn off NAS at night?
Does Synology have monthly fee?
Using a NAS is easy with low cost of ownership Tired of paying client access licenses (CALs)? Synology NAS charges no CALs or monthly subscription fees and provides a much larger, scalable storage space for further expansion.