How do you change the combination on a x10 lock?
Enter your new combination dialing LEFT, RIGHT, LEFT as if opening the lock. Stop on the last number. Dial RIGHT (clockwise) briskly until your combination starts flashing. NEW combination will flash twice followed by “PO” (pull out change key).
How do you open a locked x 09?
First Operator: Dial left (CCW) until lock is “powered”. 2. Dial the first combination in the correct manner to open the lock; i.e., left (CCW) to dial the first number, right (CW) to dial the second number, left (CCW) to dial the third number.
How do I change the combination on my Sargent and Greenleaf safe?
Insert change key into key hole on the lock’s cover….Enter a new three number combination using the changing index, dialing as follows:
- Turn dial left until the first new number aligns with the changing index the fourth time.
- Turn dial right until the second new number aligns with the changing index the third time.
Can you change the code on a combination lock?
The process involves two basic tasks: erasing your original combination number and then assigning a new one. Once you know the location of your lock’s “change” position (most manufacturers make theirs either 11 o’clock or 1 o’clock on the dial), you are ready to change the combination on the lock.
How often should combinations be reset on GSA storage containers?
Every 6 months
Built-in combination locks shall be reset to the standard combination 50-25-50; combination padlocks shall be reset to the standard combination 10-20-30; or (f) Every 6 months when NATO information is stored in the security container.
What is a GSA lock?
GSA Approved Locks for Security Containers. All GSA Approved Class 6 Security Containers must use locks that meet current Federal Specification FF-L-2740B. The Qualified Products List for this Specification authorizes the use of both KABA’s X-10 locks and Sargent & Greenleaf’s 2740B locks on GSA Approved containers.