Where is the best place to mount a projector?
You should place the projector with the center of the lens 8“ above the top edge of the screen. It has an offset of about 21 percent. That is, it should be higher than the screen by . 21 x screen height.
Can you use a ceiling mount projector on a table?
No. All projectors have a switch or setting to invert the image. Out of the box, they are set up to be right side up and mounted on a low table. If DLP, you will need to stay low and upright.
How close to the ceiling can you mount a projector?
Your EXACT lens height may be between 0 inches and 9.36 inches above the top of the screen. I would shoot for about 5″ above the top of the screen. The center of your lens should be about 43 inches (about 1.1m) from the ceiling. Give or take up to about 10cm.
How can I hide my projector in my living room?
- Stuff it in a Custom-Made Soffit. This is a popular go-to solution of home theater designers.
- Build a Wall Around It.
- Stow it Behind the Wall.
- Hide it Behind the Screen.
- Put it in a Cabinet, Place it On a Shelf.
- Tuck it Above the Ceiling.
- Consider a Short Throw Projector.
How do you power a ceiling mounted projector?
How to Run Power to a Ceiling Mounted Projector
- Scope and Install a power outlet in the attic.
- Run the projector power cable to the outlet.
- Turn on and test.
Can you plug a projector into an extension cord?
There is no problem using a extension cord of high quality to power up a 200-300 watt projector.
How far away does a projector need to be for a 120 inch screen?
Projection Distance
| Screen or image size | Projection distance (1) Minimum to Maximum | Screw hole number (2) |
|---|---|---|
| 80 inches (203 cm) | 110 to 121 inches (281 to 306 cm) | 4 |
| 100 inches (254 cm) | 138 to 151 inches (351 to 383 cm) | 3 |
| 120 inches (305 cm) | 166 to 181 inches (422 to 461 inches) | 2 |
| 150 inches (381 cm) | 208 to 227 inches (529 to 577 cm) | 1 |
Can you put a projector off center?
Horizontal lens shift offers the same kind of setup flexibility as vertical lens shift. It lets you shift the image left or right without having to swivel the projector, so you can position the projector off center from the screen and not need horizontal keystone correction.
Can a projector be slightly off center?
A projector does not have to be centered on the screen if the projector has the horizontal lens shift range to move the image onto the screen. Not all projectors have horizontal lens shift, which is not the same as keystone correction.