How do I set up my TL-WA801ND?

How do I set up my TL-WA801ND?

Connect the computer to the AP with an Ethernet cable. Open the web browser and type the IP address of the access point (Default is 192.168….How to configure TL-WA701ND V2, TL-WA801ND V2, TL-WA901ND V3 or TL-WA7210N as a repeater

  1. LAN IP: 192.168. 0.1.
  2. SSID: test ABC.
  3. Encryption Type: WPA2-PSK.
  4. Passphrase: 11667063.

How do I set up my TL-WA701ND?

Note：

  1. Note：
  2. Here we take TL-WA701ND V2 and the information below as a reference.
  3. Connect the computer to the AP with an Ethernet cable.
  4. Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.
  5. You will log into the TP-Link Quick Setup page.

How do I reset my TL wa801n?

Reset the access point to its factory default settings: use a pin to press and hold the Reset button until the Power LED starts blinking, then release the button.

How do I log into my TL WA801ND?

Type 192.168. 1.254 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your TP-Link TL-WA801ND is admin.

How do I reset my TL WA701ND?

WPS/RESET: This button is used for both WPS and Reset function. To use the WPS function, press it for less than five seconds; to use the RESET function, press it for more than five seconds. Note: For TL-WA701ND/TL-WA801ND, there is one WPS button and one RESET button.

How can I change my TP Link access point password?

Click on Management > Access Control > Passwords. Choose your user account, enter the old password, then fill in a new password and confirm it. Click Save/Apply. Go to Advanced > System Tools > Administration, enter the old password, enter the new password and enter again to confirm.

How do I setup my TP-Link extender?

How to configure Range Extender via Tether APP

  1. Login with TP-Link ID (Register first)
  2. Add a New Device.
  3. Plug the extender next to the Router and confirm the power light is solid on.
  4. Grant Location Permission for Wi-Fi auto-connect.
  5. Create a local password to manage the extender.
Q&A