What is the gap between fence palings?
palings shall be 100 x 15 mm for hardwood and 100 x 25 mm for cypress and treated pine. palings shall be lapped to prevent air gaps. The first layer of palings shall be spaced 50 mm apart and fixed with one 50 mm long nail to each paling at each rail.
How do you set a fence paling?
1Install the wider palings at the back Use a railing off-cut as a spacer to help you to get an even spacing between your palings. Starting with the wider palings, put the spacer in, but the paling up against the spacer and use a couple of nails at the top, the bottom and then the middle of the paling.
How far apart should timber fence posts be?
2m to 2.7m apart
Posts are usually set 2m to 2.7m apart for a fence up to 1.8m high. To make sure all the posts will be in a straight line, set both corner posts first. Dig holes 600mm deep x 300mm square. For fences higher than 1.8m, set your post about 1m into the ground.
How far apart should wooden fence posts be?
around 8 feet
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
Why choose a wooden paling fence?
A wooden paling fence is a great all-round option when it comes to fencing. It offers security and privacy while being easy on the back pocket. Numerous options and natural timber finishes that blend into the environment always perfectly compliment your garden.
What size nails do you use for paling fence?
NAILS On boxed paling fences, one 38mm x 2.2mm flat head nail shall be used at the top and bottom rail on the base paling and two 50mm x 2.2mm flat head nails at each rail on cover paling. Cover paling nails should be placed as close as possible to the under paling.
How can I improve the life of my timber fence?
Capping will improve the life of your fence. These must be fixed flush and shaped for water runoff, while fully covering nails and palings. If the timber is not protected in any way, it will fade to grey and break down over time. Good quality, light coloured timber paints provide the best level of protection.
How do you overlap fence palings?
Overlapping your palings makes for a private, more attractive fence than simply butting them together. First, nail on the 150mm palings using the 40 x 2mm galvanised nails, leaving a 50mm space in between each paling. Keep the palings vertical as you go – check regularly with your spirit level.