Are K Line trains any good?
Many collectors consider K-Line’s 1:48 scale offerings to be not only the best value, but also the very best mass-produced O gauge trains. K-Line’s heavyweight passenger cars are among those exhibited at The Brandywine River Museum Railroad’s annual “A Brandywine Christmas” celebration in Chadds Ford, PA.
What is O scale model train?
O Scale refers to trains that run on 2 rail O track. The term O Scale also is used to designate a commitment to scale size reproduction of real life in a scale of 1:48 size, the ratio between the real world and the model.
When did K-Line go out of business?
K-Line was a manufacturer of O gauge electric trains and accessories from approximately 1980 to 2010.
What is K-Line in automotive?
The K-Line is a very low-speed single-wire serial communication system used on many motor vehicles and commercial vehicles. It is commonly used for the diagnostic connections between the Electronic Control Modules (ECMs) on the vehicle and the diagnostic equipment (scan tools and data loggers).
Is K-Line trains still in business?
What happened to K-Line trains. K-Line sold out in February 2006 to Sanda Kan, one of its suppliers and its biggest creditor, at $3.8 million. In 2006, Lionel licensed the K-Line name and product line from Sanda Kan. The arrangement started on April 18, 2006 and lasted four years.
What is K-Line protocol?
The K-Line is a diagnostic protocol that conforms to the ISO 14230. standard. Like the standard RS232 serial interface, it is based on. the technology of typical UART (Universal Asynchronous Receiver. Transmitter) circuits.
What is the difference between the K-Line and L line?
K signal is basically the medium for most communications through OBD-II. The L signal is used for the initialization of the bus. The maximum data rate is 10.4Kbps and maximum signal voltage is 12V. K-Line is connected to pin 7 and L-Line is connected to pin 15 of the OBD-II port.
What is the difference between CAN and K-Line?
Note 1: A K-Line message is different to a CAN message, as CAN always sends an entire message at once while K-Line may send messages split into several parts. Note 2: A CAN Bus network operates constantly as a communication network and a diagnostic network between the ECMs whilst the vehicle is in operation.