Why does my true Metrix say E 3?
“E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred.
What is E 6 on Accu-Chek?
blood or control solution
“E-6” in the display means blood or control solution was applied to the test strip before the flashing blood drop symbol appeared on the display. Discard the test strip and repeat the test.
What is E 1 in Accu-Chek?
“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What is E 4 on Accu Chek?
Insufficient blood
E – 3 Test error Discard the test strip and repeat the test. E – 4. Insufficient blood (or QC. control) Discard the test strip and repeat the test. E – 5.
What is E 9 means in Accu Chek?
the battery is almost out of power
“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.
What is E 5 on Accu Chek?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care.
What is E 9 in Accu Chek?
“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter.
Why is my glucometer showing error?
Error codes may typically appear for reasons including: Blood test sample smeared or not large enough. Test strip incorrectly inserted. Wrong test strip used.
What is E4 on Contour glucose meter?
an incorrect test strip
An “E4” code indicates that an incorrect test strip was used. The CONTOUR®NEXT EZ meter can only be used with CONTOUR®NEXT Blood Glucose Test Strips and is NOT COMPATIBLE with the CONTOUR® Test Strips. To correct, repeat test with a CONTOUR®NEXT test strip. If error persists, call Customer Service at 1-800-348-8100.
How do I fix my E5?
When you see an E5 error on your air conditioner it means that the water collection tank is full. So the solution to the problem is to drain the water collection tank. This is something that is easy to do yourself without needing to call a professional AC repairer.
What is error 5 on One Touch Ultra Mini?
Products. OneTouch® UltraMini® meter. Error Message 5: The OneTouch® UltraMini® Meter displays messages when there are problems with the test strip, with the meter, or when your blood glucose levels are higher than 600 mg/dL or lower than 20 mg/dL. Messages do not appear in all cases when a problem has occurred.
Why did trividia discontinue the trueresult blood glucose meter?
GDH-PQQ enzyme-based meter systems are known to have the potential for inaccurate results due to interference. Trividia Health has discontinued the TRUEresult Blood Glucose Meters in the United States and US Territories due to this potential for inaccurate results.
What does E-5 mean on my EKG meter?
E-5 message. “E-5” in the display may mean: Blood was applied to the test strip too soon. Slide and release test/on/off button to turn off the meter and release the test strip, then turn on the meter again. Repeat the test, waiting for the flashing test strip and blood drop symbol before touching blood or control solution to the end.
What are error messages on a glucose meter?
Glucose meters display error messages when there are problems with test strips, problems with the glucose meter, or when your glucose level is higher or lower than normal. One of the common errors is the test strip error.