What size is Air Line on Eaton Fuller shifter?
A 3/8″ O.D. sup- ply air line size or larger is recommended.
What is the difference between Ultrashift and autoshift?
Auto shift has a clutch, and then uses the computer and solenoids to do the shifting. Ultrashift doesn’t have a clutch in the cab.
Why is it important to use countershaft retainer straps?
Important: Countershaft retaining straps must be used to hold the auxiliary countershafts in place until the auxiliary section is fully installed. Failure to use the straps could result in the auxiliary section moving out of time.
How much oil does a Eaton 10 speed hold?
23.5 pints
Approx. 23.5 pints [11.1 liters]. Integral oil pump, internal and external oil coolers are available.
What is the primary reason manufacturers use multiple countershaft transmissions?
Multiple-countershaft transmissions make the manufacturing process a little easier. D., p1217, multiple countershaft transmissions shorten transmission length, decrease weight, and decrease the torque load as more of the mainshaft gear teeth are used to transfer the load to the mainshaft.
What’s the difference between a Super 10 and a 10 speed transmission?
Just curious what the difference is….. Super 10 has two gears in every “hole”. One “shift” is done with switch on side of shifter. Reg 10, you go thru 5 gears, switch, go thru 5 more.
Are Super 10 transmissions any good?
The Super 10 is a VERY easy transmission to learn and many drivers refer to it as the “lazy man’s” transmission. The transmission was designed for ease of shifting and newbies do well with it because the Super 10 eliminates a lot of shifts that require moving the gearshift from one gear to another!
What kind of oil goes in a Eaton Fuller 10 speed transmission?
Subject: RE: What type of oil to use in Fuller 10 speed transmission? Farmboy99 is correct! Put the 50 weight synthetic in. The 80w-90 gear oil is too thick of a viscosity for that particular transmission especially in colder climates.
What oil goes in a Eaton 10 speed transmission?
Use Roadranger CD50 or equivalent E500 synthetic per Eaton publication TCMT-0021. When adding lubricant, types and brands of lubricant should not be mixed because of possible incompatibility. Use clean lubricant and clean containers when filling the transmission.
Is UltraShift plus automatic?
Get to know UltraShift PLUS Fleet managers and drivers alike will appreciate the improved safety and greater fleet-wide fuel efficiency these automated transmissions deliver compared to their manual counterparts and torque converter automatics.
Where can I get help with my Eaton Fuller heavy duty transmission?
Guide to servicing and repairing Eaton Fuller heavy-duty truck transmission, assistance locating the issue of transmission trouble, analyze the cause and make necessary repairs for 7, 8, 9, 10, 13, 15 and 18 speed Eaton transmissions. For more in-depth assistance refer to your transmission model service manual or give us a call at 877-776-4600.
Why choose Eaton® Fuller® air systems?
Features • Exhaustive comparison testing has shown genuine Eaton® Fuller® air system components lasting up to three times longer than will-fit products. • Made from materials chosen for long and satisfactory performance, unlike cheaper or easier to manufacture materials typical of non-genuine replacements.
Where do I find the serial number on an Eaton Fuller?
The Serial Number is the sequential identification number of the Transmission. Before calling for service assistance, write the number down as it may be needed. Bill of Material or Customer Number This number may be located below the Model and Serial Numbers. It is a reference number used by Eaton®. Fig 1-1 Eaton Fuller Transmissions
What is the purpose of the Eaton Air Service Manual?
The purpose of this manual is to assist in the diagnosis and repair of your air system. Use this manual in conjunction with other service literature produced by Eaton®, incl uding Service Bulletins, Illustrated Parts Lists, Service Manuals, and OEM service ma-terial.