How do I set up my Polycom VVX 300?

How do I set up my Polycom VVX 300?

Manual Provisioning Setup of the Polycom VVX 300/310

  1. Press the Home button.
  2. Select the Settings menu.
  3. Select option 2 – Advanced.
  4. Enter the default password “456”
  5. Select option 1 – Administration Settings.
  6. Select option 1 – Network Configuration.
  7. Select Provisioning Server.
  8. Set Server Type to: HTTP.

How do I access my Polycom settings?

You can access the Polycom Web Configuration Utility using any compatible web browser installed on your PC.

  1. Power on the phone.
  2. Confirm that the PC and phone are on the network.
  3. Enter phone’s IP address into your supported web browser.
  4. For Username, enter: Polycom.
  5. For Password, enter: 456.

Where is the IP address on a Polycom VVX 300?

To find the IP address of your Polycom VVX 300/310:

  1. Click the Home key.
  2. Scroll and select Settings.
  3. Scroll and select Status.
  4. Scroll and select Network.
  5. Scroll and select TCP/IP Paramaters.

Where is the IP address on a Polycom VVX phone?

Find IP Address

  1. At the handset press the Home button.
  2. Press the Right Arrow button until you get to Settings.
  3. Scroll down to Status and press the center select button.
  4. Scroll down to Network and press the center select button.
  5. Scroll down to TCP/IP Parameters…
  6. From there you will see the listed IP Address.

How do you transfer a call on a Polycom phone?

How do I Transfer Calls on Polycom Phones?

  1. While on an active call, press the Transfer soft key.
  2. Enter the extension number you would like to transfer to.
  3. Announce the call.
  4. Press the Transfer soft key.

How do I find my Polycom phone number?

Finding Your Phone’s Model Number on the label on the back of the phone. Each Polycom phone has a label on the back which shows the phone model. Although the location of the label varies, you will always find the phone model listed underneath the Polycom logo.

How do you reset a Polycom phone?

Follow the steps below to factory reset your Polycom phone:

  1. Press the Menu or Home button.
  2. Select Settings > Advanced. The default admin password is 456.
  3. Select Administration Settings.
  4. Select Reset to Defaults.
  5. Select Reset to Factory.
  6. Select Yes to confirm.

How do you edit contacts on a Polycom phone?

VVX Series phones

  1. Press the Home button.
  2. Select Directories.
  3. Select Contact Directory.
  4. Select Add.
  5. Enter the first name, last name and contact number of the contact from the keypad.
  6. Select Save.
Q&A