What are the steps to lockout?

What are the steps to lockout?

A lockout/tagout procedure should include the following six steps:

  1. Preparation.
  2. Shutdown.
  3. Isolation.
  4. Lockout/tagout.
  5. Stored energy check.
  6. Isolation verification.

How do you write a lockout/tagout procedure?

How to write your LOTO procedures

  1. Step 1: Preparing for shutdown.
  2. Step 2: Review the specific LOTO procedure for the asset.
  3. Step 3: Performing the shutdown.
  4. Step 4: Locating and disconnecting all energy sources.
  5. Step 5: Placing locks and tags.
  6. Step 6: Releasing or blocking any stored energy.
  7. Step 7: Verifying the lockout.

What are the 7 steps to lockout tagout?

LOTO Safety: 7 Steps of lockout tagout

  1. Prepare for shutdown.
  2. Notify all affected employees of the activities and equipment involved.
  3. Shut down the equipment.
  4. Isolate the equipment from the hazardous energy source.
  5. Dissipate residual energy.
  6. Apply applicable lockout or tagout devices.

What are steps in LOTO procedure?

The eight basic steps to a LOTO procedure are as follows:

  1. Prepare for the shutdown.
  2. Notify affected employees.
  3. Shut down the equipment.
  4. Isolate energy sources.
  5. Apply LOTO devices to energy sources.
  6. Release/control all stored energy.
  7. Verify the lockout.
  8. Maintain the lockout.

What do LOTO procedures outline?

LOTO will follow the specific instructions for each piece of equipment/machinery to identify, disconnect, isolate, lock out and verify the lock out of the appropriate energy sources.

How many steps are in the sequence for lockout/tagout procedure?

Without the use of proper Lockout/Tagout safety procedures, the equipment being worked on can unexpectedly start up or release these forms of energy.

What are the basic components of a LOTO procedure?

What Workers Need To Know about LOTO:

  • Aspects of the employer’s energy control program.
  • Elements of the energy control procedure relevant to the employee’s duties or assignment.
  • The various requirements of OSHA standards related to lockout/tagout.

How many steps in lock out/tag out?

After the six steps of lockout tagout have been completed and maintenance has been performed, the power of the equipment must be restored. To do this, one must ensure all tools and debris has been removed from the area. Personnel must remove the lockout tagout device(s) from the energy isolation location(s).

Why is lockout required?

Lockout/Tagout is required when the unexpected energization or start up (or release of stored energy ) of machines, equipment or prime movers could injure workers during cleaning, repairing, servicing, setting-up, adjusting and un-jamming.

What is the purpose of a lockout?

The purpose of a “Lockout/Tagout” procedure is to protect employees from machines and equipment capable of causing injury due to unexpected energization, release of stored energy or the start-up of equipment while an employee is performing maintenance or servicing equipment.

What is the most important step in the lockout sequence?

Once the equipment or machine has been isolated from its energy source, lockout/tagout is the next step. This step is the most important in the entire six-step process. The authorized or approved employee will attach the lockout, Tagout devices to an energy-isolating device.

What are the 7 steps of lockout tagout?

LOTO Safety: 7 Steps of lockout tagout

  • Prepare for shutdown.
  • Notify all affected employees of the activities and equipment involved.
  • Shut down the equipment.
  • Isolate the equipment from the hazardous energy source.
  • Dissipate residual energy.
  • Apply applicable lockout or tagout devices.
Blog